Quote:
Originally Posted by 9dreizig
My windows wouldn't work yesterday. I traced it down to no power to the fuse (first one on the fuse block nearest the rear of the car). I can put power to that point and they work fine.
My wiring diagram says that black wire comes from the "power window control unit"..
Anyone know where that unit is ? Looks like a relay box in the diagram
|
Hi Dan.
Todd,
Here's what I think.
The power window control unit and the power window relay are the same component,
as there is only one relay in the CKT.
Many times when a relay contains any solid state devices, it is designated a "control unit"
Additionally, fuse #1 get's the +12V from the relay.
I would be looking for +12V @ pins 7 & 2.
Pin #7 most probably feeds the CKT, and pin #2 is on the relay armature/contact
which feeds the window switches.
Check all of the above prior to purchasing a new relay, as too often,
P-car owners buy non-refundable unneeded electrical parts.
There is one on eBay. Item #270368115573
Here is the location of the power window relay.
If all of the above fails, pm me.
Good luck,
Gerry