Quote:
Originally Posted by magnuskgc
thanks guys.. I am referring to the six way power switch on the side.. I have tried to clean the switch the best I can..
Dale that helps ALLOT... I did replace the seat bolts and actually the mounting blocks underneath too (fabricated new ones).. You don't happen to have pics or anytihing that would assist in routing the wires in to the seat?
|
If your remove the switch housing, there are small holes that will accomodate the "straw" from your contact cleaner spray can.
While you are spraying the contact cleaner, rock the switches left to right and up and down.
Do not use WD40.
This will get the cleaner into the contact.
I would not dis-assemble the switch.
Good luck,
Gerry