Pelican Parts Forums
Page 4 of 4 « First « Prev 2 3 4
Show 40 post(s) from this thread on one page

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   911 / 930 Turbo & Super Charging Forum (http://forums.pelicanparts.com/911-930-turbo-super-charging-forum/)
-   -   Information about the 934 CIS Injection (http://forums.pelicanparts.com/911-930-turbo-super-charging-forum/665600-information-about-934-cis-injection.html)

Alan L 10-02-2012 10:28 AM
If the 930 injector diameter is smaller than the 934 housing thread, at a push you can probably have small insert sleeves machined up to use the 930 injectors, if 934s are unobtainable. It will depend on how much discrepancy in diameter you have - enough to allow for an inner and outer thread to be cut, hopefully.
Alan

Grupp-A 10-06-2013 02:13 AM
My Bosch Motorsport racing CIS K-jetronic in action :)

https://www.youtube.com/watch?v=xs1gTdUrmN4

/Daniel

SAY - 642 10-06-2013 12:29 PM
Thank-you for sharing that fascinating youtube clip, Daniel ! :eek:

spence88mph 10-07-2013 06:25 AM
Awesome vid, moving some serious juice!

Your Volvo is super clean, thanks for the info, very interesting.


All times are GMT -8. The time now is 08:19 PM.
Page 4 of 4 « First « Prev 2 3 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.