Jacking point damage/ smog question???

[Pfan]

I am going to be looking at a late 930 while a PPI is being done. I was sent the pictures below and the damage around the rear bracket was said to have been caused by a flatbed drivers hook. There also appears to be an indentation in the frame below the torsion bar mount..."from improper jacking"???? Opinions?? This is an otherwise very nice 30K mile car and in the hands of a reputable shop.

I was also told that it has all of its 50 state smog equipment....does this mean it doesnt need a "Calif Emissions" equip option??? This is a great forum of knowledge! Thanks

[Doug Smith]

Welcome and let's see more pictures!

Jacking point damage? I certainly wouldn't let that deter me if everything else is correct with the car. Looks easily repairable to me-if you ever decided it needed to be.

Smog question - don't have an opinion on that.

[onboost]

^^ Agree.. both are minor and fixable. If the car is otherwise as you believe, don't let this stop you!

Good luck!

[bpu699]

My car had underbody dents near the jacking point there too. Most shops have no idea how to jack these cars up. On a prior porsche, the tire shop jacked it up under the foot area in back!!! Caused huge indentations, which I pounded out with a rubber mallet. I was pissed.

[mussberger]

Originally Posted by Pfan

I was also told that it has all of its 50 state smog equipment....does this mean it doesnt need a "Calif Emissions" equip option??? This is a great forum of knowledge! Thanks

]

The jack points look like that of a later car and from what I understand 86-89 were all 50 state cars. As long as everything is still there you should be good.

[T77911S]

i think they ran over something or the car slipped off a jack to bend that like that.
one place might look like a jack stand.
i always put jack stand on suspension connecting points.
i dont jack my car there either. i use the engine for the rear and the a 2x4 under the body right in front of the gas tank for the front.

its hard to find a car with out floor pan damage. when i was looking for a 930 that was one of the things i looked for. the one bought had a large "dent" but because it was over a big area i was able to pop it back out.

as long as the car is straight, solid, and not real structural damage it is ok

when i take my car(s) to a shop like a tire shop, very rare, i am always out there to make sure they dont damage the under side of the car. somes times i wil just take the wheels off and take them to the shop to ahve tires put on.

[Miguel Antonett]

What year is that car?

US model?

I have never seen that square w/hole in the middle thingy on a 930... like newer 911s style jacking point. Also, the TB cover plate/bolting looks suspicious.

GOOD idea the PPI and watch those "reputable shops". If u can, get a fellow pelicanne to go with you...

[bpu699]

Originally Posted by Miguel Antonett

What year is that car?

US model?

I have never seen that square w/hole in the middle thingy on a 930... like newer 911s style jacking point. Also, the TB cover plate/bolting looks suspicious.

GOOD idea the PPI and watch those "reputable shops". If u can, get a fellow pelicanne to go with you...

Mines an 87 and has them...