what pressure relief piston for bypass?

[svandamme]

Hi folks,

about to order my stuff to put my case back together

but can't find the specific part numbers for the pressure relief piston ...

i had my case machined, for the oil bypass
the rebuild book only tells you the partnumber for the cap , not for the spring and pistons itself


999.064.026.02 for the cap

can somebody tell me what other thingies i need for proper operation of the pressure relief system with the oil bypass drilled?



the book mentions an update kit , but can't find it on the pelican site?

[Peterfrans]

Stijn,

You need the parts listed below (two pistons, one spring, one sleeve and two plugs.

[svandamme]

Thanks Peter,

so i need the following

911.107.512.00 Piston Pressure Relief Valve 1
930.107.531.01 Spring new 86 mm 1
930.107.533.00 Spring guide 1
999.064.016.02 Plug new with groove 2
900.123.071.30 Gasket 2
901.107.531.00 Spring Safety Valve 1


added those to my project list , going to ordere this week , might get my short block assembled and closed before the end of this year

[Peterfrans]

911.107.512.00 Piston Pressure Relief Valve 2

als jij voor het bier zorgt, wil ik je wel helpen dichtmaken

[svandamme]

lol

'kzal nog wel iets laten horen als ik zo ongeveer alles klaar heb
je begrijpt wel , dat er enkel belgische heavy in mijne frigo te vinden is?

[Peterfrans]

das prima, liever geen laf bier

[BK911]

I just looked it up yesterday. It's:

pel rebkt oil1
$31.45

[svandamme]

Thx Bk

that kit is about 10 bucks cheaper than the seperate components in it

you saved me 10 bucks , if you ever visit Rotterdam : let me know and i'll introduce you to some fine Belgian beers and a monster hangover


LOL > this thread is turning into a beer promise thread

[Wayne 962]

These part numbers are also listed on Page 215 of the book, in Appendix B.

-Wayne