Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > 911 Engine Rebuilding Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered User
 
Join Date: Jan 2006
Posts: 135
Garage
Where is this leaking from? Help!!

Can anyone tell me what needs to be replaced in this area. When under acceleration oil comes up from this area (drips when idle or not running). The oil is not coming from the upper valve cover side, but from under the fiberglass engine shroud. It looks like a gasket needs replaced? I canít seem to figure it out after reading the manuals I have. Any help?
Thanks
Old 02-20-2006, 01:36 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered User
 
JoeMag's Avatar
 
Join Date: Jul 2005
Location: Cleveland, OH
Posts: 987
the only thing there is the head / cam tower mating surface. it's a metal to metal seal.

i had pic to post but don't know who to do on reply
Old 02-20-2006, 02:19 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Forced Induction Junkie
 
WERK I's Avatar
 
Join Date: Jan 2003
Location: Wisconsin
Posts: 3,291
Garage
How does it look from the underside, between cylinders/heads and the heat exchangers?
Also, keep in mind that the fiberglass cover is a point of higher pressure due to cooling fan pressurizing that plenum. Without that cover off, it is difficult to give a definitive answer.
__________________
Dave
'85 930 Factory Special Wishes Flachbau
Werk I Zuffenhausen 3.3l/330BHP Engine with Sonderwunsch Cams, FabSpeed Headers, Kokeln IC, Twin Plugged Electromotive Crankfire, Tial Wastegate(0.8 Bar), K27 Hybrid Turbo, Ruf Twin-tip Muffler, Fikse FM-5's 8&10x17, 8:41 R&P
Old 02-20-2006, 02:43 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered User
 
Join Date: Jan 2006
Posts: 135
Garage
Last week I disassembled the air intake etc. and noticed nothing! Now I am having this leak and there are no signs of it coming from the bottom. This is what has been bothering me?? I am taking the intake back off and will post more pics. Still need some help!
Thanks!
Old 02-20-2006, 03:14 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Reply

Thread Tools
Rate This Thread
Rate This Thread:

 


All times are GMT -8. The time now is 09:51 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.