|
|
|
|
| Author |
|
|
Registered
Join Date: May 2006
Posts: 36
|
911 SC engine/trans separation problem
911 SC engine and trans out of car. 4 nuts off, trans. won't slide off engine. Do I have to remove clutch lever, circlip, and 2 springs in order for the trans to slide off studs? somethings hanging it up. thanks.
|
||
05-13-2006, 05:37 AM
|
|
|
GAFB
Join Date: Dec 1999
Location: Raleigh, NC, USA
Posts: 7,842
|
Yes.
__________________
Several BMWs |
||
|
05-13-2006, 06:04 AM
|
|
|
Registered
Join Date: May 2003
Posts: 3,346
|
Yes,
The clutch fork shaft has to be able to rotate about 45 degrees as you pull the tranny off. -Andy
__________________
72 Carrera RS replica, Spec 911 racer |
||
|
05-13-2006, 09:51 PM
|
|
