Oil temperature sending unit adapter

[neilca]

I am installing an oil temperature gauge in my race car. The six cylinder Porsche engine used a 13M X 1.5 thread in the case for the standard VDO sender. The Autometer gauge uses a 1/8 pipe thread for it's sensor. Does anyone make an adapter to go from 13M to 1/8 pipe? Anyone else solved this problem?

Thanks,
neilca

[304065]

neil, search here for the thread dimensions, I think "accusump" will help

[Henry Schmidt]

North Hollywoog Speedometer
6111 Lankershim Blvd.
North Hollywood CA,
91606
Tel. 818-761-5136
e-mail: info@nhspeedometer.com

Pegasus Auto Racing Supplies, Inc.
2475 S 179th Street
New Berlin WI 53146 US
1-800-688-6946 US & Canada)

[neilca]

Thanks guys,

I decided to try and gut the VDO sending unit and tap for the 1/8 pipe. Worked like a champ.

neilca

[Jeff Alton]

I have mounted a GM style 1/8 pipe sensor in both the 1/2/3 side chain box cover and the breather housing. Both location yield a temp reading similar to the reading on the factory dash VDO gauge on my 3.4.


Cheers