|
|
|
|
| Author |
|
|
Registered
Join Date: May 2008
Posts: 726
|
Shroud missing?
There is a gap between the oil cooler and the gray plastic shroud shown in this photo, is there a piece of shroud missing? Or is this normal?
|
||
04-30-2010, 05:14 PM
|
|
|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,513
|
What you have is all there is...
Bruce |
||
|
04-30-2010, 05:20 PM
|
|
|
Registered
Join Date: Dec 2003
Location: Centreville, MARYLAND
Posts: 938
|
Engines that clean don't run well!
__________________
Old Tee all 911s sold |
||
|
05-01-2010, 06:09 AM
|
|
|
Registered User
|
Looks like a rebuilt oil cooler and the top piece was welded in with a little more curve to it and now you have a gap. I'm just guessing from what the picture shows.
__________________
Mark Jung Bend, OR MFI Werks.com |
||
|
05-01-2010, 07:52 AM
|
|
|
Registered
Join Date: May 2008
Posts: 726
|
The oil cooler was worked on by Pacific oil cooler service the receipt did state that some welding was done. I sent it to them for testing and cleaning. What could I use to fill that gap? Piece of aluminum? The gap is 7mm (1/4").
|
||
|
05-01-2010, 12:33 PM
|
|
|
Registered
|
Don't sweat it-mine is the same.
__________________
Ed Hughes 2015 981 Cayman GTS 6 speed,Racing Yellow Past:1984 911 Targa (Ruby), 1995 993C2 (Sapphire), 1991 928S4 |
||
|
05-01-2010, 05:45 PM
|
|
|
|
Registered
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 8,513
|
You can pull up on the aluminum to give you the fill you desire.
Bruce |
||
|
05-01-2010, 05:58 PM
|
|
|
Registered
Join Date: May 2003
Posts: 3,346
|
Mine has a strip of rubber glued to it to take up the space.
-Andy
__________________
72 Carrera RS replica, Spec 911 racer |
||
|
05-03-2010, 03:06 PM
|
|
1957 Porsche 356 A Coupe 2.7 Short Stroke
1972 Porsche 72 Coupe
1984 Porsche 911 Targa 3.4L
Sapphire
