Pelican Parts Forums
Page 2 of 2 « Prev 1 2
Show 40 post(s) from this thread on one page

Pelican Parts Forums (http://forums.pelicanparts.com/)
-   911 Engine Rebuilding Forum (http://forums.pelicanparts.com/911-engine-rebuilding-forum/)
-   -   3.0 MFI build by www.tech9.ms (http://forums.pelicanparts.com/911-engine-rebuilding-forum/846112-3-0-mfi-build-www-tech9-ms.html)

NickP 05-02-2017 09:16 PM
This engine is a work of art. I swear I've run through this thread 10 times....

jm993rs 05-06-2017 02:16 PM
Very very very good Job !!!!

Is one littlel dream !!! http://forums.pelicanparts.com/support/smileys/wat1.gif

JmuRiz 05-08-2017 06:09 AM
Makes me wish I could afford to buy the MFI system a friend has, as his client just went high butterfly :(

This 3.0 MFI is such a great looking engine, with power numbers to back it up!!!

panzerfaust 05-16-2017 07:03 AM
stunning beauty of a motor... thank you for sharing

H-viken 05-16-2017 08:00 AM
Quote:
Originally Posted by pht9 (Post 8433160)

Dyno testing – Final results 308bhp @ 7600rpm with 233 ft/lbs torque @ 5300rpm with silencing requirements met to allow for MSA event testing
Built as a rally specification engine with good low-mid range torque characteristics, the torque curve is very flat. In race/circuit specification the power output would be closer to 340bhp
What parts would have to change to go from 308 to 340? Cams only?


All times are GMT -8. The time now is 11:51 AM.
Page 2 of 2 « Prev 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.