|
|
|
|
| Author |
|
|
Registered
|
Need help identifying 3.2 main bearings
Does anyone know what the replacement part number is for 930.132.61? I'm pretty sure they're standard inner dia / .25mm outer dia
any info would be appreciated
__________________
-Rich- 1984 911 Track 1985 911 Track/Autocross |
||
05-08-2016, 07:17 AM
|
|
|
Registered
Join Date: Feb 2007
Location: Northeast
Posts: 464
|
It would be very unusual to have a 3.2 case linebored oversize-have you measured the bore?
__________________
Mark www.exotechpower.com 1981 Targa-messed with. 91 C2 supercharged track rat Radical Prosport-irritates the GT3 guys 40 years of rebuilding services |
||
|
05-09-2016, 03:51 AM
|
|
|
Registered
|
I don't have a bore gage but I did measure the old bearings and new bearings with a caliper. Putting the bearings mated together and then measuring the I.D. / O.D. / & thickness of the bearing...it all points to a .25mm larger O.D.
I was hoping someone would confirm the old part number and then offer up the new part number
__________________
-Rich- 1984 911 Track 1985 911 Track/Autocross |
||
|
05-09-2016, 02:04 PM
|
|
|
Registered
Join Date: Feb 2007
Location: Northeast
Posts: 464
|
Are you sure the number doesnt have a 101 after the 930? The part number is too short.
If those are available be prepared for the price-won't be cheap
__________________
Mark www.exotechpower.com 1981 Targa-messed with. 91 C2 supercharged track rat Radical Prosport-irritates the GT3 guys 40 years of rebuilding services |
||
|
05-09-2016, 02:36 PM
|
|
|
83 911 Production Cab #10
|
Quote:
Item 18: Porsche Crankshaft (102-00) NLA on PP but they where $100 x 12
__________________
Who Will Live... Will See  83 911 Production Cab #10, Slightly Modified: Unslanted, 3.2, PMO EFI, TECgt, CE 911 CAM Sync / Pulley / Wires, SSI, Dansk Sport 2/2, 17" Euromeister, CKO GT3 Seats, Going SOK Super Charger |
||
|
05-09-2016, 05:06 PM
|
|
Barney
Poopster
1984 Porsche 911 Carrera
Das Babe
Das Babe Metalberiech
