Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Miscellaneous and Off Topic Forums > Off Topic Discussions


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
Join Date: Jun 2012
Location: Queanbeyan, Australia
Posts: 66
Middle aged apprentice mason

I am a 43 year old executive considering a major life change, and would appreciate opinions and words of wisdom from the Pelican crew.
My family and I will shortly be moving to Washington DC for my wife’s 3-year posting, and I will have the opportunity to quit my corporate job to do something completely different.
I love working with my hands, DIY, working on my 911 etc and always regretted not studying a trade in my younger years.
I’m strongly considering training to be a bricklayer, which would complement a side business I have cleaning chimneys.
I am physically fit and financially secure enough to take a major pay cut.
What do you think? Completely crazy? Am I likely to find an employer to train someone my age for a few years?
Appreciate any advice, particularly from masons.
I will likely return to an office job eventually but
Would love to have brickie in my skill set. Cheers


Last edited by AC78; 08-03-2021 at 04:16 AM..
Old 08-03-2021, 03:29 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
I see you
 
flatbutt's Avatar
 
Join Date: Nov 2002
Location: NJ
Posts: 29,873
Go for it! So long as you and yours can afford to do it I say yes. My son took a break from his career to do woodworking for a bit. He enjoyed and the break confirmed that his original choice of a career was the correct one for him.
__________________
Si non potes inimicum tuum vincere, habeas eum amicum and ride a big blue trike.
"'Bipartisan' usually means that a larger-than-usual deception is being carried out."
Old 08-03-2021, 03:41 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Information Overloader
 
Join Date: Mar 2003
Location: NW Lower Michigan
Posts: 29,334
I think the allure of laying bricks for a living will wear off quickly. My dad was a bricklayer for 20 years. As a hobby it would be fun but as a day-in, day-out job it would get old. My dad did major upgrades to our home(s) and we built fireplaces from scratch, i.e., digging the hole to topping off the chimney in one weekend. That was pretty fun because there was some design, structural considerations and artistry involved-and time pressures. Homeowners got real nervous when dad would take the circular saw and cut a gaping hole in somebody’s living room on Saturday morning.

I went to college instead of going into business with my dad. He was disappointed. From a corporate job to construction is quite the leap. Different worlds.
Old 08-03-2021, 03:46 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Still Doin Time
 
asphaltgambler's Avatar
 
Join Date: Nov 2004
Location: Nokesville, Va.
Posts: 8,225
You have a desire, set financially- so go do it. Personal experience, I'd rather have regrets about doing something and not working out, than regrets of nothing ventured of things that interested me. I saw my parents and their friends sacrifice for family, careers and once established just could not risk 'side interests' even if the resource was largely time. That's because they were of The Greatest Generation, whom I believe that they had made it through the Depression, WWII, and raising a family. As if they couldn't bring themselves to get off track or take a break from moving forward.

That idea strongly propelled me in somewhat opposite direction. Driven to succeed = yes, always moving forward = yes, go have some fun or try a hobby = absolutely.

I will say I've been a helper with concrete, masonry briefly with my own projects - it is some of the hardest work there is.......and I grew up on a farm. I say go for it, give it the same attention as you would in your line of work.

Life is far too short....
__________________
'15 Dodge - 'Dango R/T Hauls groceries and Kinda Hauls *ss
'07 Jeep SRT-8 - Hauls groceries and Hauls *ss Sold
'85 Guards Red Targa - Almost finished after 17 years
'95 Road King w/117ci - No time to ride, see above
'77 Sportster Pro-Street Drag Bike w/93ci - Sold
Old 08-03-2021, 04:09 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
?
 
Join Date: Apr 2002
Posts: 30,344
There are lots of "careers" that are a younger person's viable options imo, but that is "pretty green grass" on the other side of the fence in many instances. Are you financially secure? If so, then do whatever you want to do... you've earned that option !

Many folks leave their corporate rodeos at the peak of their careers... and never look back while in their 40s too... YMMV.

Hope that helps !

.... while not executive level, I decided I wasn't gonna "work on Maggie's farm no more" at 48. No regrets and no looking back either... but where did the last 13 years go ?

Best to you and good luck!
Old 08-03-2021, 04:13 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Back in the saddle again
 
masraum's Avatar
 
Join Date: Oct 2001
Location: Central TX west of Houston
Posts: 55,760
Quote:
Originally Posted by AC78 View Post
I love working with my hands, DIY, working on my 911 etc and always regretted not studying a trade in my younger years.
I’m strongly considering training to be a bricklayer, which would complement a side business I have cleaning chimneys.
Appreciate any advice, particularly from masons.
I will likely return to an office job eventually but
Would love to have brickie in my skill set. Cheers
I think that being able to change directions 180º and having the balls to give it a shot is fantastic. If you want to give it a shot, do it.
Quote:
Originally Posted by flatbutt View Post
My son took a break from his career to do woodworking for a bit. He enjoyed and the break confirmed that his original choice of a career was the correct one for him.
Many years ago, I got laid off (early 2001 when the market crashed). The company that canned us (a ton of us) paid for and sent us to, not a head hunter, but a company that was supposed to help you fill out a resume, interview, we took personality tests to determine what we should be doing, etc....

The personality test thing was interesting. You'd get some scores that were ranked. The highest ranked item was supposed to be what you did for a living. The second ranked item (in my case, working with my hands (cars, carpentry, etc...) was the kind of thing that they said would be better as a hobby than a job.

Quote:
Originally Posted by Crowbob View Post
I think the allure of laying bricks for a living will wear off quickly. My dad was a bricklayer for 20 years. As a hobby it would be fun but as a day-in, day-out job it would get old.

I went to college instead of going into business with my dad. He was disappointed. From a corporate job to construction is quite the leap. Different worlds.
I've often heard that if you take something that you enjoy as a hobby and try to turn it into a job you can end up hating it and not even enjoying it as a hobby any more.
__________________
Steve
'08 Boxster RS60 Spyder #0099/1960
- never named a car before, but this is Charlotte.
'88 targa SOLD 2004 - gone but not forgotten
Old 08-03-2021, 04:28 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
Registered
 
Seahawk's Avatar
 
Join Date: Jul 2004
Location: Maryland
Posts: 31,386
Since you will be accompanying your wife for her tour here in the DC, why not?

If you don't like it there are many, many jobs in the DC area across the spectrum of career paths.

I do have one word of caution: I don't know what the weather is like in Queanbeyan, Australia, but DC in the summer is hot, Africa hot, and humid - as the saying goes, "air you can wear".

I live 50 miles south of DC and know the drill!

Again, best of luck. I looked up Queanbeyan...looks like a neat place.
__________________
1996 FJ80.
Old 08-03-2021, 04:30 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)
Model Citizen
 
herr_oberst's Avatar
 
Join Date: May 2007
Location: The Voodoo Lounge
Posts: 18,707
Good for you for wanting to do this.

I just hope you know what you're getting yourself into. Obviously you won't be laying bricks for a long time while your boss - who might be younger than you - decides if you have what it takes while you're doing all the dirty heavy work, and anything else that he decides needs doing, while the journeymen (Again, he or she might be a decade younger) do the good stuff. Summer and winter. Almost always outdoors.

Again, I tip my hat to you for thinking this might be right!
__________________
"I would be a tone-deaf heathen if I didn't call the engine astounding. If it had been invented solely to make noise, there would be shrines to it in Rome"
Old 08-03-2021, 04:46 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)
Registered
 
Zeke's Avatar
 
Join Date: Jan 2002
Location: Long Beach CA, the sewer by the sea.
Posts: 37,603
No. If you wat to enter the trades, do it through a program where you can actually learn the trade before you start working. e.g., an electrician. If you start into masonry or tile setting all you will end up doing is mixing mortar and sweeping. Sure, sparky's get siht jobs as helpers but most everyone has their hands on wire unless you're digging a trench.

Sparky's are smart enough to call in a trencher or hoe.

No. 2: be prepared to work your ass off at the pace of a 20 YO.
Old 08-03-2021, 07:41 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)
Slippery Slope Victim
 
NY65912's Avatar
 
Join Date: Oct 2001
Location: Brooklyn, NY USA
Posts: 4,379
As a plumbing contractor in NYC (local1), I would try to get into the apprenticeship program of a union. We have had plenty of older guys/gals come through the apprenticeship school.

Be prepared to take a huge cut in pay as first year apprentices make almost minimum wage.

BUT, the payoff in the 5 year investment is great, $71.50 per hr (35hr) and a fantastic benefits package.

It can be done, just be prepared. Good Luck
__________________
Mike²

1985 M491
Old 08-03-2021, 08:21 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #10 (permalink)
Counterclockwise?
 
Join Date: Oct 2005
Location: Keswick, Ontario
Posts: 6,356
Garage
My body hurts just thinking about an apprentice mason.
__________________
Rod
1986 Carrera
2001 996TT
A bunch of stuff with spark plugs
Old 08-03-2021, 08:32 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #11 (permalink)
Registered
 
Join Date: Mar 2004
Location: Los Angeles
Posts: 17,314
Two of my concrete guys are older gents, 50s maybe early 60s. They grew up in the business learning it from their fathers. If you look at them, their spines are no longer straight. Sure, they have helpers for the past 20 years, but their bodies are beaten. It only takes about 7-10 years to beat yourself up.

I say give it a go because that's what puts a smile on you at the end of the day but working for the boss is no fun unless you are on a large crew doing commercial type work where there's lots of equip to help with the lifting. Blocks get heavy by the 10th one. I say learn as much as you can, and put in your time for a couple years, go out on your own and choose your own job instead of lifting blocks for someone else. Much more satisfactions on giving people what they want and see the result and the smiles on their faces.
Old 08-03-2021, 08:35 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #12 (permalink)
 
Back in the saddle again
 
masraum's Avatar
 
Join Date: Oct 2001
Location: Central TX west of Houston
Posts: 55,760
Quote:
Originally Posted by 911 Rod View Post
My body hurts just thinking about an apprentice mason.
Right, "in shape" is one thing, brick laying seems like something else entirely.
__________________
Steve
'08 Boxster RS60 Spyder #0099/1960
- never named a car before, but this is Charlotte.
'88 targa SOLD 2004 - gone but not forgotten
Old 08-03-2021, 08:38 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #13 (permalink)
Registered
 
Join Date: May 2014
Posts: 298
Quote:
Originally Posted by AC78 View Post
I am a 43 year old executive considering a major life change, and would appreciate opinions and words of wisdom from the Pelican crew.
My family and I will shortly be moving to Washington DC for my wife’s 3-year posting, and I will have the opportunity to quit my corporate job to do something completely different.
I love working with my hands, DIY, working on my 911 etc and always regretted not studying a trade in my younger years.
I’m strongly considering training to be a bricklayer, which would complement a side business I have cleaning chimneys.
I am physically fit and financially secure enough to take a major pay cut.
What do you think? Completely crazy? Am I likely to find an employer to train someone my age for a few years?
Appreciate any advice, particularly from masons.
I will likely return to an office job eventually but
Would love to have brickie in my skill set. Cheers
Reality check;go to a a local home supply store,grab a full size bag of mortar mix and carry it around on your shoulder see how it would be to do this all day.
Old 08-03-2021, 08:41 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #14 (permalink)
Registered
 
JavaBrewer's Avatar
 
Join Date: May 2002
Location: North County San Diego
Posts: 8,810
Garage
Awesome that you have an opportunity to try this. However I agree with others here - masonry work is HEAVY. I worked a summer with a mason during high school and despite being in wrestling shape I was destroyed by the third day. All the materials are heavy and labor intensive to prepare and deliver. Having laid much tile in my homes I would prefer a less back breaking trade, YMMV. Good Luck!
Old 08-03-2021, 09:00 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #15 (permalink)
?
 
Join Date: Apr 2002
Posts: 30,344
Sooo ... do you prefer to be called "pops" or "gramps" by the young guys ?
Old 08-03-2021, 09:03 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #16 (permalink)
LWJ LWJ is online now
Registered
 
Join Date: Jun 2007
Location: Lake Oswego, OR
Posts: 6,039
DO IT.

It clearly calls to you. You enjoy working with your hands. You have a Plan B (office gig) should this not be all sunshine and roses.

I suspect that you will regret it if you don't.


In a similar vein, I have been wrenching on motorcycles recently. What a joy. It is great therapy.
Old 08-03-2021, 09:58 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #17 (permalink)
Back in the saddle again
 
masraum's Avatar
 
Join Date: Oct 2001
Location: Central TX west of Houston
Posts: 55,760
Not that this is directly applicable to your question, but if you haven't, I suspect you'll enjoy searching youtube for "Fred Dibnah"

Here's a short one, but there is a documentary series on him that is, I think, four 30 min videos. It's well worth a watch and does have brick/chimney relevance.

__________________
Steve
'08 Boxster RS60 Spyder #0099/1960
- never named a car before, but this is Charlotte.
'88 targa SOLD 2004 - gone but not forgotten
Old 08-03-2021, 10:07 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #18 (permalink)
Registered
 
SamC.'s Avatar
 
Join Date: Dec 2014
Posts: 133
Things to Consider for the National Capital Region (NCR):

Median Home Price in Northern VA ( June 21) $650K
Avg Apartment Rent ( June 21) is $2K per month (+/-)

The Masonry Trade generally belongs to the Hispanic population ( Legal and Illegal residents).

Population of NCR is 12 million people. The work you seek is there, just a matter of finding it.

Generally speaking, traditional brickwork will be either commercial or high-end residential. Most average residential homes, the exterior cladding is either Hardi-board or vinyl.

Hope this helps.
Old 08-03-2021, 10:46 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #19 (permalink)
Registered
 
Join Date: Jan 2002
Location: west michigan
Posts: 26,388
If I were to make a career change....it would be to an auto warranty caller.
Would be fun to tell everyone that theirs have expired.

__________________
78 SC Targa Black....gone
84 Carrera Targa White
98 Honda Prelude
22 Honda Civic SI
Old 08-03-2021, 10:53 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #20 (permalink)
Reply


 


All times are GMT -8. The time now is 02:39 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.