Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Miscellaneous and Off Topic Forums > Off Topic Discussions


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Checked out
 
McLovin's Avatar
 
Join Date: Jun 2009
Location: On a beach
Posts: 10,127
Best way to cook a steak? (NOT on a BBQ/grill)

What’s the best way to cook a steak, using a stove and/or oven only?
I’ve heard in the past about using some combo of a cast iron skillet on the stove, and baking/broiling in the oven.
I’ve never cooked a steak on anything other than an outdoor grill, and they’ve always been ok, but not great imo.
Time to try something new.
Recommendations?

Old 08-04-2022, 11:20 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered
 
pwd72s's Avatar
 
Join Date: Apr 2001
Location: Linn County, Oregon
Posts: 48,576
There is no best way without a grill. (edit) You might try George Forman
__________________
"Now, to put a water-cooled engine in the rear and to have a radiator in the front, that's not very intelligent."
-Ferry Porsche (PANO, Oct. '73) (I, Paul D. have loved this quote since 1973. It will remain as long as I post here.)

Last edited by pwd72s; 08-04-2022 at 11:25 AM..
Old 08-04-2022, 11:22 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Platinum Member
 
dad911's Avatar
 
Join Date: Jul 2001
Location: Leave the gun. Take the cannoli.
Posts: 21,103
sous vide, then seared.
__________________
Political polls are often to give you an opinion, not to find out what your opinion is - Scott Adams
Old 08-04-2022, 11:24 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered
 
Join Date: Oct 2012
Posts: 9,780
Garage
Quote:
Originally Posted by McLovin View Post
What’s the best way to cook a steak, using a stove and/or oven only?
I’ve heard in the past about using some combo of a cast iron skillet on the stove, and baking/broiling in the oven.
I’ve never cooked a steak on anything other than an outdoor grill, and they’ve always been ok, but not great imo.
Time to try something new.
Recommendations?
The cast iron method you mention delivers a VERY good steak.

Heat your cast iron in the oven to very hot, then put on the stove on High. use a good, high smoke point oil. Sear the side fat of the steak first, as this breaks it up and lets it flavor the meat. 1-2 minutes on each side, then into the oven on Broil for 5-6 minutes.

Perfect.
__________________
Guy
'87 944 (first porsche/project car)
Old 08-04-2022, 11:25 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Banned
 
Join Date: Jul 2011
Location: St Paul MN
Posts: 19,426
cast iron.

salt and pepper as soon as you get it home. get the pan very hot, little butter, 3 mins per side. let rest for 5 before slicing and eating.

steak is one of the easiest things to cook. its also about the only beef i eat any more.
Old 08-04-2022, 11:27 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Registered
 
Join Date: Jan 2002
Location: west michigan
Posts: 26,880
Quote:
Originally Posted by dad911 View Post
sous vide, then seared.
This....only way to get it perfectly cooked throughout.
__________________
78 SC Targa Black....gone
84 Carrera Targa White
98 Honda Prelude
22 Honda Civic SI
Old 08-04-2022, 11:35 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
LWJ LWJ is online now
Registered
 
Join Date: Jun 2007
Location: Lake Oswego, OR
Posts: 6,096
Yes as above. BUT. Use fresh cracked black pepper. Larger salt crystals are good as well.

I do similar for Tuna. Yumm.
Old 08-04-2022, 11:54 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)
Counterclockwise?
 
Join Date: Oct 2005
Location: Keswick, Ontario
Posts: 6,437
Garage
I sear my steak on the inferred side burner.
Nothing compares to it.
__________________
Rod
1986 Carrera
2001 996TT
A bunch of stuff with spark plugs
Old 08-04-2022, 11:59 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)
Back in the saddle again
 
masraum's Avatar
 
Join Date: Oct 2001
Location: Central TX west of Houston
Posts: 56,301
The key to a great steak is for it to be cooked to the right amount, not too much or too little.

I usually use salt and pepper, and may add garlic powder and onion powder, but they aren't necessary.

I don't know that I have a strong feeling regarding low/slow or hot/fast as long as it's cooked the the correct level everywhere. The size and type of steak probably has a bearing on the best way (low/slow vs hot/fast) to cook it. I'm guessing that a giant slab of meat that resembles a side of beef probably needs more low/slow to ensure that the inside is right without the outside being over done. Something smaller can probably be done hot/fast and still come out tasty. I'm also not 100% sure if the cut/type of steak will make a difference, ie filet mignon vs a heavily marbled ribeye, but I think it would.

I like a sear (maillard) on the outside. It should be dark brown and yummy. If it's black and tastes like coals, then it went too far. The inside should be juicy and flavorful and tender.

There are several ways to track the correct doneness of steak. I use a thermometer and generally shoot for the 135-137º range. Make sure you take it off and let it rest before you cut, carve, eat it.. When I was younger, my dad and I grilled a lot. But I'm grilling a lot less in the last 10 years for a variety of reasons.
__________________
Steve
'08 Boxster RS60 Spyder #0099/1960
- never named a car before, but this is Charlotte.
'88 targa SOLD 2004 - gone but not forgotten

Last edited by masraum; 08-04-2022 at 12:07 PM..
Old 08-04-2022, 12:05 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #9 (permalink)
Back in the saddle again
 
masraum's Avatar
 
Join Date: Oct 2001
Location: Central TX west of Houston
Posts: 56,301
Quote:
Originally Posted by dad911 View Post
sous vide, then seared.
This is probably THE best way. The sous vide get the steak to the perfect spot, then the sear adds the maillard flavor (which is important).

I've never had anything sous vide, but I've read and heard a lot about it.
__________________
Steve
'08 Boxster RS60 Spyder #0099/1960
- never named a car before, but this is Charlotte.
'88 targa SOLD 2004 - gone but not forgotten
Old 08-04-2022, 12:06 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #10 (permalink)
Fleabit peanut monkey
 
Bob Kontak's Avatar
 
Join Date: Nov 2007
Location: North Canton, Ohio
Posts: 20,738
Garage
Quote:
Originally Posted by gacook View Post
The cast iron method you mention delivers a VERY good steak.
+1

My daughter moved in with me after college and we snagged 20 or so 16-18 ounce rib eyes from one of those overnight dry ice steak/lobster delivery services. They were clearing inventory and the steaks were about $10 each.

Anyhoo, she starts watching these YouTube videos on how to do the stove top and oven method using a cast iron skillet. She makes me go out and buy the olive oil that can handle high heat and she does the rest.

They were 93.7% as good as any of the downtown Chicago steak houses I have dined in and that is saying something.

Took us a six months to go through them but what a treat each and every time.

Now I gotta study sous vide. LOL
__________________
1981 911SC Targa
Old 08-04-2022, 12:19 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #11 (permalink)
Registered
 
Join Date: Jan 2002
Location: west michigan
Posts: 26,880
To get the final sear on a sous vide steak....I use a hand held MAP torch with a flat tip that spreads the flame.
Only takes a minute or so per steak and there is minimal smoke....perfect.
__________________
78 SC Targa Black....gone
84 Carrera Targa White
98 Honda Prelude
22 Honda Civic SI
Old 08-04-2022, 12:25 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #12 (permalink)
 
Registered
 
Join Date: Apr 2005
Location: San Antonio, Texas YEEHAW
Posts: 5,389
Garage
Quote:
Originally Posted by gacook View Post
The cast iron method you mention delivers a VERY good steak.

Heat your cast iron in the oven to very hot, then put on the stove on High. use a good, high smoke point oil. Sear the side fat of the steak first, as this breaks it up and lets it flavor the meat. 1-2 minutes on each side, then into the oven on Broil for 5-6 minutes.

Perfect.
I've done this and it is really good. As an aside, BBQ is a food and not an appliance.

__________________
Matthew - drove Nurburgring with wipers on and no rain
1969 911E SOLD
2002 996 Cabrio
1995 993 Carrera 4 SOLD
2004 Land Rover Discovery II G4 Edition (Sold )
Old 08-04-2022, 12:29 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #13 (permalink)
Navin Johnson
 
TimT's Avatar
 
Join Date: Mar 2002
Location: Wantagh, NY
Posts: 8,818
Sous Vide+ sear...

If you lack Sous Vide equipment...

Reverse Sear... Sear in a cast iron pan... finish in the oven ( or over charcoals indirectly)

I have finished the steaks occasionally in an 800+ deg pizza oven..

Sous Vide:











__________________
Don't feed the trolls. Don't quote the trolls
http://www.southshoreperformanceny.com
'69 911 GT-5
'75 914 GT-3
and others
Old 08-04-2022, 01:58 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #14 (permalink)
Registered
 
Join Date: Jan 2002
Location: west michigan
Posts: 26,880
I have done steaks, ribs, chicken, eggs, pork chops, and bacon in my sous vide.
All have turned out great. The best thing about sous vide is that you don't have to be concerned about over-cooking it.

If you like your steaks med-rare...just set the temp to 129 and it will be perfect.
__________________
78 SC Targa Black....gone
84 Carrera Targa White
98 Honda Prelude
22 Honda Civic SI
Old 08-04-2022, 02:06 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #15 (permalink)
Senior Member
 
Superman's Avatar
 
Join Date: Feb 2000
Location: Lacey, WA. USA
Posts: 25,309
The cast iron pan/oven method, or even without the oven but with meticulous timing, is the best way to cook a steak. Why? At the end of the process, basically every drop of water, fat and flavor is still in the steak. And it is cooked perfectly.
__________________
Man of Carbon Fiber (stronger than steel)

Mocha 1978 911SC. "Coco"
Old 08-04-2022, 02:20 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #16 (permalink)
Registered
 
p911dad's Avatar
 
Join Date: Dec 2004
Location: Charlotte, NC
Posts: 2,332
Garage
A nephew works as a chef in a high end steakhouse and he tells me the best way is on a hot cast iron flat griddle. So, my wife picked up a little cast iron flat griddle at Aldi's (of all places, LOL!). I use it on a Weber gas grill, it just sets on the grates. Turned up high for a bit, smoking hot. I pam the steak lightly. I have been getting these great 2" thick rib eyes or NY Strips and it takes about 6 min. per side turned once, no fork, only tongs. I get the internal temp to about 125F (use a digital thermometer) and then let it rest for a bit. It turns out perfectly caramelized and medium rare. Never over an open flame. There are a lot of ways to cook steak and this is just one way that works for me. I have ruined a lot of meat on grills over the years and this way was a revelation. I prefer cooking steaks and fish outside so the house doesn't get smoked up.
Old 08-04-2022, 04:16 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #17 (permalink)
Registered
 
Shaun @ Tru6's Avatar
 
Join Date: Dec 2001
Location: Cambridge, MA
Posts: 44,451
Here is what I do.

Season both sides of the the steak with salt at least an hour before cooking it. I press in freshly ground pepper just before cooking. Cast iron pan on high heat (gas) until it's extremely hot. Oven at 400ºF. Pat steaks so they are DRY. Wet steaks steam. And cool the pan down. Even cast iron. I typically do 1.5-2" ribeyes though have done a few NY strips. 2 minutes on first side. Flip. 1-2 minutes on other. Oven for 4 minutes. Remove from the oven, steak on a plate to rest at least 10 minutes. Can do any number of sauces, quick and easy is butter and shallots and fresh rosemary and thyme. Can splash some Bordeaux in and reduce it if you like.



















__________________
Tru6 Restoration & Design
Old 08-04-2022, 04:28 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #18 (permalink)
Registered
 
Join Date: May 2016
Posts: 58
Garage
2 ways I love to cook steak

1) Reverse Sear: heat oven to 200 degrees, season (I use Montreal steaks seasoning) a room temperature steak; place in the oven until internal temp gets to 120 degrees; let it rest for 10-15 under foil; sear on hot cast iron pan with butter and some herbs (I make a mixed butter with rosemary, garlic, salt and chill until it’s hard and cut small pads to place on the steak when searing). This is a good link. https://tasty.co/recipe/reverse-sear-steak

2) on my Big Green Egg, I crank up heat to 700 degrees and sear it on both sides then shut the vents and cook until desired internal temperature
Old 08-04-2022, 04:30 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #19 (permalink)
Registered
 
Shaun @ Tru6's Avatar
 
Join Date: Dec 2001
Location: Cambridge, MA
Posts: 44,451
You get a feel for it over time.

With sauce moutarde





Sometimes Kate's Butter is enough








Freshly picked hen of the woods mushrooms and Madeira




With truffle fries









__________________
Tru6 Restoration & Design
Old 08-04-2022, 04:38 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #20 (permalink)
Reply


 


All times are GMT -8. The time now is 01:13 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.