Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
speedracer92's Avatar
 
Join Date: Apr 2019
Location: Jacksonville, FL
Posts: 320
Left Turn Signal Doesn't work when Headlights are on

Just replaced the bulb for the left turn signal below the headlight on my 87 Targa. During that time, I also took both headlights to just clean behind them. Now, when I have the headlights on - the left turn signal does NOT work and the indicator light on the Tach stays ON. The right side continues to work inside and out as it should. When the headlights are off, the left side indicator light on the tach will go off, and all signals work as they should.

Got to be the new bulb or something there but nothing looks out of sorts.

Any ideas from anyone?

TIA

Old 06-02-2019, 04:50 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered
 
Join Date: Mar 2019
Posts: 1,614
Sounds like it's backfeeding through the parking light bulb. Verify that the bulb is in and twisted all the way. Could also be that a ground got jarred loose.
Old 06-02-2019, 06:10 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Registered
 
speedracer92's Avatar
 
Join Date: Apr 2019
Location: Jacksonville, FL
Posts: 320
Quote:
Originally Posted by dannobee View Post
Sounds like it's backfeeding through the parking light bulb. Verify that the bulb is in and twisted all the way. Could also be that a ground got jarred loose.
Thanks. Gave that a try before - but didn't seem to work. I am going to buy another bulb and see if that is the cause.
Old 06-02-2019, 07:09 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered
 
speedracer92's Avatar
 
Join Date: Apr 2019
Location: Jacksonville, FL
Posts: 320
Just to provide documentation for any future searches, the issue was I had the incorrect bulb in the light fixture. A double filament bulb is required so it works one for lights when on and then again when use the turn signal. Took me a bit to figure it out by researching parts, but luckily I did.

Old 06-04-2019, 05:48 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Reply


 


All times are GMT -8. The time now is 10:03 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.