3.6 conversion, where do you route the DME harness from under the seat to the engine?

[Speed metal]

Just like the title says,, where have you guys routed the DME harness from under the seat to the engine bay on conversions? The car is a mid year
Thanks!

[pdtweeks]

Speed,

lots of 3.6 conversion stuff using "search"...
Here's what I did;

[rattlsnak]

basically, the same way the factory did it. Just like the picture above!

[3rd_gear_Ted]

For my 3.6 conversion track car, I mounted my DME unit vertically with vibration isolation spacers on the rear firewall behind drivers seat. Added another ground strap too. Harness passes thru 1 1/2" hole with big grommet on lower right vertical foot well wall. (harness plugs needed a hole this big to pass thru)
Relays mounted to rear center hump between seat wells.
Also, just didn't want the brain of the car "laying down" on the job

[pdtweeks]

3rd gear is right......you want to mount the unit on isolators with additional grounding.

[Speed metal]

This is some great info! Perfect
Thanks guys.