![]() |
|
|
|
Registered
|
Bill I now get a measurement from inner wall as to your picture. It is now 14.5 inches.
![]() |
||
![]() |
|
Moderator
|
Quote:
Billjam got a tad under14", I get the same on my '76 Carrera 3.0, +1.5 sound about right on mine 8ET25 w/ a 225/40 x17 is a very tight fit w/ shaved lips, but no ride height restrictions
__________________
Bill Verburg '76 Carrera 3.6RS(nee C3/hotrod), '95 993RS/CS(clone) | Pelican Home |Rennlist Wheels |Rennlist Brakes | |
||
![]() |
|
Registered
|
I was hoping someone with a backdated car with Fiberglass RSR fenders running 930 Turbo brake setup would chime in with some measurements and manufacturer of Fiberglass fenders they have. Also running the 9s/11s x17 Linea Corsa rims.
|
||
![]() |
|
Registered
|
thanks Bill. thats a hugely informative diagram and one i have not yet seen on Pelican. Thanks!
|
||
![]() |
|
Registered
|
So, my question has been answered. A friend just sent me his measurement of his Fiberglass fenders of 15 1/2 in. Measurement with 9x17 Linea Corsa rims with wildwood front brake setup.
![]() ![]() |
||
![]() |
|
![]() |
Thread Tools | |
Rate This Thread | |
|