|
|
|
|
| Author |
|
|
'79 911SC Targa
|
Hardware Help
A while back a bought a Carrera tail and decklid for my '79 SC. The car originally had a tail, so I found one I could afford I picked it up. My personal preference is the Carrera style tail, so it all good.
The tail and decklid were already separated which was a good thing and helped me to get it home. Now it is time to put the tail back on the deck lid and I don't know which bolts and washers I need. I assume the tail assemble is complete, so I only need the hardware to reattach it to the decklid. Based on the diagram, I think it is either #16 or #29. Thank you!!! ~Keith +++ 
__________________
Has anyone seen my 10mm?? |
||
02-09-2021, 02:20 PM
|
|
|
Registered
Join Date: Dec 2006
Location: Northern VA
Posts: 585
|
I’m in the process of refreshing my tea-tray tail on my 1980 911 SC – I think I may have an aftermarket #24/ spoiler deck as I don’t have the #37 – grill #47 air guide – as shown in the illustration
#29: 900 119 091 02 - Pan-head screw M6 x 15 / #28: 999 507 328 02 – captive nut My #24 spoiler deck is affixed to the rear engine lid #23 via nine loose washer tapping screws anchored by captive nuts
__________________
Kim Langley 2012 Carrera / 991.1 80 911SC 97 C230 73 BMW 2002Tii |
||
|
02-09-2021, 04:22 PM
|
|
