![]() |
|
|
|
Registered
Join Date: Jan 2012
Location: Melbourne, Australia
Posts: 377
|
Window keeps sticking
One of my power windows got stuck in the closed position some time ago. I eventually took the door panel apart and got it unstuck using the manual hex key in the motor trick. I only had to turn it slightly, it gave a pop, and then worked normally using the motor. I greased everything I could get to, and then put everything back together. No issues for a few weeks, but I went for a drive last weekend and... It's stuck again. Should I just replace the motor at this point? I'm surprised it stuck again, because it worked smoothly with no hesitation after I freed it up last time.
|
||
![]() |
|
Registered
Join Date: Jun 2000
Location: bottom left corner of the world
Posts: 22,753
|
Maybe spay some silicon on the window track so the glass slides up and down without as much friction.
|
||
![]() |
|