Side Window Seal Question

[Wish76]

I replaced the inner and outer window track seals on my '85 cab; unfortunately the improved seals pulled the glass out of the channel (not all that surprised based on the quality of the window regulator work done prior). I have new window track seals... what adhesive should I use? is it the Porsche Adhesive kit (000-043-305-35 - https://www.pelicanparts.com/More_Info/00004330535.htm?pn=00004330535&KeepHeader=Y&SVSVSI=0582 ) or is there some other product recommended?

Thanks in advance!

[2.7RS]

Honestly any good contact cement will do.
I don't know what it's sold in Spain
I'm sure the Porsche glue is great
Just be sure there are no oil or grease residue

[Wish76]

Originally Posted by 2.7RS

Honestly any good contact cement will do.
I don't know what it's sold in Spain
I'm sure the Porsche glue is great
Just be sure there are no oil or grease residue

I can get the Porsche adhesive in Spain, just don't need to spend 220€ (about $250) if I can avoid, reliably.

Thanks!

[2.7RS]

220 euros. Damn

I don't blame you

[Wish76]

Originally Posted by 2.7RS

220 euros. Damn

I don't blame you

Yeah, and 3M products are not very available here (short of importing from U.S. at crazy prices). Petec brand out of Germany is probably the 3M equal here.

[911obgyn]

3m super weatherstrip adhesive, i am sure there is a wurths version. Are you talking about the glass to track on the regulator?

[Wish76]

Originally Posted by 911obgyn

3m super weatherstrip adhesive, i am sure there is a wurths version. Are you talking about the glass to track on the regulator?

Yes - glass to track on regulator. As mentioned above, unfortunately 3M is hard/expensive to get, but I can get Petec out of Germany via Amazon. Oddly, Wurth is not on Amazon Spain, and expensive to ship otherwise.