Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
Join Date: Mar 2003
Posts: 3
Porsche Crest Reverse Light Out 92 C2 Help Please

I HAVE A 92 C2 AND THE REVERSE LIGHTS ARE OUT. FUSES AND BULBS CHECK OK. CAN'T FIGURE IT OUT. I SEARCHED THE ARCHIVES BUT FOUND NOTHING TO HELP EXCEPT SWITH ON TRANSMISSION? ANY OTHER SUGGESTIONS? THANKS

Old 04-04-2003, 07:53 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered
 
Join Date: Mar 2003
Location: the plains, va
Posts: 212
Send a message via AIM to 69 911s
How far have you traced the problem?
__________________
when you see hoof prints, dont automatically assume zebras
Old 04-05-2003, 12:47 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Driving member
 
jester911's Avatar
 
Join Date: Aug 2001
Location: Marietta,Georgia
Posts: 2,942
Garage
I think yours is same as mine. (earlier carrera) The switch for the reverse lights is on the tip of the tranny. This switch seems to be intermittent on my car. I haven't got around to fixing it yet but if fuse and bulbs are ok then that is what has to be fixed or replaced.
__________________
Jerry
'86 coupe gone but not forgotten

Unlike women, a race car is an inanimate object. Therefore it must, eventually, respond to reason.
Old 04-05-2003, 12:59 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered
 
Join Date: Mar 2003
Location: the plains, va
Posts: 212
Send a message via AIM to 69 911s
on the g50/50 the switch is on the passenger side of the trans and if the boot is not firmly in place or cracked, then it gets crud in it pretty easily. been there, done it.
__________________
when you see hoof prints, dont automatically assume zebras
Old 04-05-2003, 01:39 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Registered
 
Jim Smolka's Avatar
 
Join Date: Aug 1999
Location: Hickory NC USA
Posts: 2,502
Check the wiring behind the boot. Could be broken and just need to be soldered.
__________________
'75 914-6 3.2 (Track Car)
'81 SC 3.6 (Beast)
'993 Cab (Almost Done Restoring)
Old 04-05-2003, 02:19 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Registered
 
Join Date: Jan 2002
Posts: 563
hallo
If your Car is a Tiptronic the Switch is in the Console and your Shifter pushes it .
harald
Old 04-05-2003, 12:24 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
Registered
 
Join Date: Jul 2001
Location: Denver Area
Posts: 1,017
So is the reverse switch position in the same place as a 915? Thanks in advance.

__________________
Grady aka plain fan
66 912 - enjoying the good life
78 911 SC and 90 C2 turbo look cab - gone but not forgotten
01 996 TT -
09 Audi A4 Avant - daily driver
Old 11-01-2004, 02:57 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)
Reply


 


All times are GMT -8. The time now is 08:44 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.