|
|
|
|
| Author |
|
|
Registered
Join Date: Jun 2004
Location: Prescott, AZ
Posts: 180
|
Reinstalling my engine...HELP
Guys,
I have gotten my 2.7 engine back in my 74 911S and am now trying to re-connect all the lines and hoses. There is a spot for a hose one the Cold Start Valve on the back of the engine. Where the heck does the other end connect to?
__________________
Jim T. 87 911 Carrera Guards Red Coupe Cat Bypass, SW Chip, 7's & 9's |
||
01-10-2005, 08:38 AM
|
|
|
Registered
Join Date: Aug 1999
Location: Hickory NC USA
Posts: 2,502
|
There should be 3 connections depending on where the hoses were disconnected. On goes to the warm up regulator, one is the pressure side that is fed from the fuel fitler/fuel accumulator combination. The other is way in the back drivers side of the motor that is the fuel return that delivers the fuel back to the gas tank
__________________
'75 914-6 3.2 (Track Car) '81 SC 3.6 (Beast) '993 Cab (Almost Done Restoring) Last edited by Jim Smolka; 01-10-2005 at 09:03 AM.. |
||
|
01-10-2005, 09:01 AM
|
|
|
Registered
|
connections for cis
hi
try looking at the exploded parts views on the site such as here http://www.pelicanparts.com/911/911_Parts/1974-75/2-3-1.JPG gary
__________________
1975 911S Targa Silver Anniversary Edition |
||
|
01-10-2005, 05:09 PM
|
|
 |
| Thread Tools | |
| Rate This Thread | |
|
|
