|
|
|
|
| Author |
|
|
Registered
Join Date: May 2004
Location: Dublin, Ireland
Posts: 49
|
Help identifying CIS electical connectors
Hi all, having had to replace my airbox on my '76 euro Carrera 3.0 (don't ask) I've found there are 2 electrical connectors that could plug in to either the CSV or the back of the fuel distributor?
Both have green connectors on them - can anyone tell me which is which? (one of the connectors has the outer sheath stripped so I may able to identify it through the wire colours inside? - however I don't have a wiring diagram) Thanks! Warren McAllister
__________________
'76 Carrera 3.0 '02 Mercedes Benz E200K Bianchi (Road) Cannondale F800 (MTB) |
||
01-28-2005, 04:17 AM
|
|
|
Registered
Join Date: May 2004
Location: Dublin, Ireland
Posts: 49
|
bump
__________________
'76 Carrera 3.0 '02 Mercedes Benz E200K Bianchi (Road) Cannondale F800 (MTB) |
||
|
01-28-2005, 06:58 AM
|
|
|
Registered
Join Date: Dec 1999
Location: Richmond, VA USA
Posts: 1,058
|
For a USA '76 911S:
Air Meter Switch (air sensor on top of air box near the fuel distributor) has black+brown and brown wires. Cold Start Valve has yellow and red+black wires. |
||
|
01-29-2005, 07:15 AM
|
|
|
Registered
Join Date: Mar 2001
Location: Marysville Wa.
Posts: 22,427
|
one is blue, the other is green. they do look similar though. blue to the cold start valve, green to the sensor plate.
__________________
https://www.instagram.com/johnwalker8704 8009 103rd pl ne Marysville Wa 98270 206 637 4071 |
||
|
01-29-2005, 07:42 AM
|
|
|
Registered
Join Date: May 2004
Location: Dublin, Ireland
Posts: 49
|
Thanks Guys!
Warren
__________________
'76 Carrera 3.0 '02 Mercedes Benz E200K Bianchi (Road) Cannondale F800 (MTB) |
||
|
01-29-2005, 09:36 AM
|
|
