Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
TWork's Avatar
 
Join Date: Feb 2004
Location: Old Hangtown
Posts: 529
Quick WUR Question (w/ pic)

I pulled out my WUR to open it up and clean out any gunk. Unfortunately, I had to pry a bit to get it to finally open up. When I did, I had parts everywhere. Well, I've found all my parts, but I wasn't able to see how everything was laid out beforehand. My I've figured out how the springs go (I think), but not clear on where the "hat" goes. Does it sit on top of the two springs with the point going up? I assume that's the way it goes, but thought I'd solicit input before putting it together and back into the car wrong.


__________________
'73 Targa
Old 10-08-2005, 04:40 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Original Owner
 
tsuter's Avatar
 
Join Date: Dec 2002
Location: San Antonio, Texas
Posts: 1,907
The "hat" goes down towards the spring with a small metal rod that fits into the hole in the bimetallic spring.
__________________
tsuter
78 911SC Turbo Targa
Thaaaats Right!!

Last edited by tsuter; 10-08-2005 at 05:05 PM..
Old 10-08-2005, 05:01 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Registered
 
john walker's workshop's Avatar
 
Join Date: Mar 2001
Location: Marysville Wa.
Posts: 22,463
use a dab of point grease to stick the pin in the hat. it keeps it pointing up so you can assemble the halves.
__________________
https://www.instagram.com/johnwalker8704

8009 103rd pl ne Marysville Wa 98270
206 637 4071
Old 10-08-2005, 05:10 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Original Owner
 
tsuter's Avatar
 
Join Date: Dec 2002
Location: San Antonio, Texas
Posts: 1,907
Here is a photo to help. The hat goes down into the wire spring as a seat. It has a metal rod that then goes up to the bimetallic spring.



Lot of these laying around the shop....
__________________
tsuter
78 911SC Turbo Targa
Thaaaats Right!!
Old 10-08-2005, 05:12 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Original Owner
 
tsuter's Avatar
 
Join Date: Dec 2002
Location: San Antonio, Texas
Posts: 1,907
Yup you can see the grease on mine..... keep it from falling out on reassembly
__________________
tsuter
78 911SC Turbo Targa
Thaaaats Right!!
Old 10-08-2005, 05:13 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Registered
 
TWork's Avatar
 
Join Date: Feb 2004
Location: Old Hangtown
Posts: 529
This forum never ceases to amaze me. Great members. Thanks for the info and pics. I didn't realize there was a pin. Sure enough, looking around when the WUR exploded, there was the pin laying on the ground.

Thanks again!

T.

__________________
'73 Targa
Old 10-08-2005, 05:43 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
Reply


 


All times are GMT -8. The time now is 11:26 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.