|
|
|
|
| Author |
|
|
Registered
Join Date: Apr 2006
Location: Ontario
Posts: 291
|
I have question
Looking throw some of my receipts and i found, that the head mods where done by Motor Meister, intake port and polished, 3.8 super cup cams, and new HP head studs, the cams were custom cut by Dougherty Racing Cams. This was all done to a 3.2L. Being from Canada i am not familiar with this shops, and the mods done to the motor. Are they good mods? Is the places they got done good? The car was purchased in Pennsylvania. Oh and it has a chip with rev limiter a 7200rpm. Thanks for your input
|
||
05-31-2006, 04:43 PM
|
|
|
Registered
Join Date: May 2004
Location: Encinitas (San Diego CA)
Posts: 4,495
|
Do a search on each of these shops. You'll be able to read about "motor meister" for days and likely you'll cringe and your blood may boil. You could read for days on their negative feedback, probably without finding much positive.
In contrast, John Dougherty is a frequent poster here (CAMGRINDER). I believe his reputation is as good as it gets. The search button is your friend. I used "dougherty cams" and returned 63 threads alone. You will find the button between FAQ and HOME towards the top right. How's your engine run? Doug
__________________
1971 RSR - interpretation Last edited by DW SD; 05-31-2006 at 05:05 PM.. |
||
|
05-31-2006, 04:54 PM
|
|
