|
|
|
|
| Author |
|
|
Registered
Join Date: Dec 2004
Posts: 21
|
1975 911 pertronix usage
I recently purchased a used dist with pertronix installed to install in my 1975 sportomatic. what are the proper wiring precedures and connections that need to be made? dist is from a 2.7 with the pertronix installed. #'s on dist are 023101840607 and JFUD 6
|
||
06-01-2006, 01:53 PM
|
|
|
Montana 911
Join Date: May 2002
Location: Montana
Posts: 5,818
|
if I remember you run the black wire to the coil and the red to a voltage source in the fuse panel in the engine bay. It's been a few years so I hope someone will chime in for you.
__________________
H.D. Smith 2009 997.2 S 3.8 PDK 2019 Ford Ranger Lariat FX4 Baby Raptor 2019 Can Am Renegade 1000R XC 2020 Yamaha YFZ450R |
||
|
06-01-2006, 01:59 PM
|
|
|
Registered
Join Date: Apr 2003
Location: Tampa FL
Posts: 798
|
__________________
Current: 07 S4 Avant, 06 Volvo S60R Sold: '74 911, 01 986, 93 Volvo 240 |
||
|
06-01-2006, 02:56 PM
|
|
|
Registered
Join Date: May 2001
Location: Peoples Republic of Long Beach, NY
Posts: 21,140
|
I used a connector buss instead of soldering the Pertronix for a quick remove and replace.
__________________
Ronin LB '77 911s 2.7 PMO E 8.5 SSI Monty MSD JPI w x6 |
||
|
06-01-2006, 05:20 PM
|
|
