|
|
|
|
| Author |
|
|
Registered
Join Date: Jul 2002
Location: Sydney, Australia
Posts: 2,477
|
Headlight part number question - 73 2.4E
Does anyone know the part no. of the screw that attaches the lower edge of the headlight assembly to the tab on the front guard (fender)?
The lights are Euro H4's and are mounted by a lip at the top engaging a matching lip on the top of the guard and this screw on the bottom. The tab is inside the headlight recess on the guard and I'm pretty sure has a threaded hole. The PO of my 73 2.4E has used some self tapping screws which keep working loose. From memory, the correct screw has a plain cylindrical part of larger dia near the head and a threaded part of smaller dia on the other end.
__________________
Cheers, Ryan 1969 911E (historic racer) 911ST replica (tarmac rally) |
||
09-09-2006, 07:56 PM
|
|
|
Registered
Join Date: Dec 1999
Location: TX USA
Posts: 9,804
|
M5 chrome-plated brass countersunk Phillipshead screw... 901.631.119.00
__________________
Warren Hall, Jr. 1973 911S Targa ... 'Annie' 1968 340S Barracuda ... 'Rolling Thunder' |
||
|
09-09-2006, 08:01 PM
|
|
|
Registered
Join Date: Jul 2002
Location: Sydney, Australia
Posts: 2,477
|
thanks warren
a pelican search on that no. yeilded "Part Superceded to 90027006307", which is "H5 Trim Ring Screw, 911 (1987-89)" do you think this will fit a 73?
__________________
Cheers, Ryan 1969 911E (historic racer) 911ST replica (tarmac rally) |
||
|
09-09-2006, 09:55 PM
|
|
