|
|
|
|
| Author |
|
|
Registered
Join Date: Nov 2006
Location: Copenhagen
Posts: 77
|
Tail light unit - How do I disconnect wires ?
Hi,
I trying to take out the tail light unit on my 911S from 73. But the wires are all black covered with a thick layer of Dinitrol. How/ where are the wires connected ? and how and where do I unplug the wires ?? Any help much appreciated - especially pictures showing what I should expect under the Dinitrol. Thanks. Best regards Peter
__________________
'73 911S Targa black - original  '73 911RS clone 3.6, non-sunroof Coupé  '01 Volvo V70T5 - 320bhp 
|
||
11-20-2006, 09:23 AM
|
|
|
Registered
Join Date: Nov 2001
Location: WASHINGTON STATE
Posts: 2,886
|
The wire connects with a multi-pin round plug to a receptor in the body.
Look inside the engone compartment and you will see the wiring harness fitted to a round connector in each corner.
__________________
78 911SC sunroof Coupe (SOLD) 97 328i Convertible |
||
|
11-20-2006, 09:51 AM
|
|
|
Registered
Join Date: Nov 2006
Location: Copenhagen
Posts: 77
|
Poorsha - thanks. Yes I see the connector inside from engine comp. Is it the same connector type on the outside ?
Peter
__________________
'73 911S Targa black - original '73 911RS clone 3.6, non-sunroof Coupé '01 Volvo V70T5 - 320bhp
|
||
|
11-20-2006, 10:13 AM
|
|
|
Registered
Join Date: Nov 2001
Location: WASHINGTON STATE
Posts: 2,886
|
Peter,
the plug in the engine compartment will put out. The tail light has a female plug that is press fitted into the body.
__________________
78 911SC sunroof Coupe (SOLD) 97 328i Convertible |
||
|
11-20-2006, 06:52 PM
|
|
