New project.... a clean slate

[Gertvr]

Cool Project subscribed

[Rory Mckenna]

NIce...

[gtu935]

This project was put on the back burner for a while but, here are some pictures as of today.

[gtu935]

top cut off

[gtu935]

we sprayed an anti rust sealer on the body which turned it brown in spots

[gtu935]

[gtu935]

[gtu935]

[gtu935]

This fella hasn't opted for a high power turbo engine like the 934 posted project but, we are doing Haltech engine management system with a custom intercooler/Carrera intake manifold and electric injectors. We'll post pictures of that as soon as we have some.

[gtu935]

Both front camber boxes in place

[gtu935]

This roll cage will be gusetted to the body where ever possible but, without over kill

[DaddyGlenn]

sub'd

[Kroggers]

Keep it coming...

[gestalt1]

really nice! i'm wondering how you are going to get paint/rust prevention in the enclosed areas like the rockers and pillars?
thanks,
matt

[gtu935]

Once the body panels are fitted they are going to be removed so that the entire body canl be powder coated inside and out. The body panels will the be refitted and then the car will be sent out for paint.

[gtu935]

Well, after quite a long hiatus the project continues. here's the tub after blasting and powder coating. We had prefit all the FRP body panels before the tub left for the coater. It shouldn't be long before the car is ready forthe engine.

Bill Rudtner

www.rudtnersracing.con

[gtu935]

[gtu935]

[gtu935]

[gtu935]