|
|
|
|
| Author |
|
|
Registered
Join Date: Sep 2003
Location: San Antonio, Texas
Posts: 171
|
Howdy Folks,
I could really use some help with this and pictures if you have them. I have an offroad race car with a 3.2 engine in it. I am trying to get the charging system working. There are 5 wires coming out of the Alternator. 2 Red, 2 Brown and 1 blue (per the picture below). What goes to the Voltage Regulator? We talk about DF and D+ or D- etc., but it would be better to say that 1 Blue and 1 brown goes to the Voltage Regulator etc. = ) Off Road cars tend to not use the same stuff as a regular Porsche car. I know this is a strange request but any insight I can get would be WONDERFUL! Simple pictures of the Voltage Regulator and what the wires go to? Thanks. Eric
__________________
If it isn't dirty, it isn't fun!!! |
||
05-28-2007, 10:11 PM
|
|
|
Registered
Join Date: Sep 2006
Posts: 198
|
My schematic for a 1977 (i doubt 3.2..) with separate Vreg shows DF wire to be Black. Vreg relay bounces +12/grd.
I'm guessing but yours sounds internal Vreg. Pcitures already posted here showing this. |
||
|
05-29-2007, 06:55 AM
|
|
