These decals are easily produced in laser cut vinyl. There are some guys on the forum that already do this I believe but I also have a contact who would produce these as well at a very reasonable price.

Saw this quote somewhere on this forum and loved it...thought it would make a good decal....I'm going to do some anyway!
Cheers. Dave

http://forums.pelicanparts.com/uploa...1206528167.jpg

How is your project going. I was able to get a photo of the decal I inquired about. Is it good enough?


http://forums.pelicanparts.com/uploa...1207508441.jpg

just an idea

tire psi at 125 mph from a 72s




http://forums.pelicanparts.com/uploa...1207510641.jpg

Gee Ron, I see you have a bunch of pics of a green car...

i tried to document some things.. also engine comp stuff that I have no idea what it is.

Wayne, would be really nice if you could announce on this site when you are retailing the decals. Secondly, since it appears form the comments many of us are unsure of the decals that came on our cars, the decals could be sold as sets for a given year range. Thanks LYnn

Thanks for continuing to post decals you find. Could you please remember to include the dimensions as I cannot reproduce these without them. The idea is to catalog decals in model and year as sets so it would be a real help to include that information as well with your photos.
Much appreciated.
Dave.

Probably either MFI, or Paul's old hookah setup...

It is 2"x5"

Thanks Scott...no problems
Dave.

Reproduction Decals
 

I have found that a Gerber Edge Thermal Printer works best to reproduce decals. It is very difficult to tell the difference between the repro and the original.

Can the Pelicans build a data base for all to share from? Please advise.

911_pilot

robert@firstimpressionsign.com

That's the plan Rob.

Dave,

Thanks for the decal which arrived over the weekend.
The graphics are perfect !!
I will be putting it on my replaced fan housing at the end of the month and will send pics when I get the car back !

Many thanks,
Dennis. :)

Dave,

How is your project going?

Dave,

The work looks great.

Maybe you can help a bunch of us in the states...my SC is an RoW, that was repainted by the PO years ago. I don't have anything to go by to send pics or even know what I'm missing. Being "down under" that gives you an advantage. If you have anything I'm interested.

Dave,

This is the alternator housing metal decal 89mmX45mm
http://forums.pelicanparts.com/uploa...1211645918.jpg
http://forums.pelicanparts.com/uploa...1211645940.jpg

These are from the DS door pillar the large is 22mmX64mm the small 27mmX30mm

http://forums.pelicanparts.com/uploa...1211646023.jpg

I've been looking for this one, from a 84 coupe:

http://forums.pelicanparts.com/uploa...1211649684.jpg
Pieces are missing (especially the French parts). Can anyone help with the missing parts?

You probably have most of these, but here you go anyway. All from 1984 911 coupe:

http://forums.pelicanparts.com/uploa...1211650044.jpg

http://forums.pelicanparts.com/uploa...1211650139.jpg
http://forums.pelicanparts.com/uploa...1211650210.jpg
http://forums.pelicanparts.com/uploa...1211650335.jpg

Just curious, have you tried to order from Pelican? It does come up in their database when you enter the part number 928 006 521 00