930 Trailing Arms

[martin_gibson]

Searching through various threads on the subject:

I understand that to install late 930 trailing arms on a narrow body (72 c/w turbo flares) using the correct offset mounts, then the hub will end up moving approx 1" (25mm) to the outside.

Does this mean that a standard 11" Fuchs cannot be used?

Thx

Martin

[MBEngineering]

HI martin
with STD turbo arches , yes 11" wheel will not fit under.

regards mike

[martin_gibson]

Originally Posted by MBEngineering

with STD turbo arches , yes 11" wheel will not fit under.

Mike - thanks for confirming that.

Does anyone produce 11 x 15" Fuchs with a Turbo offset?

Martin

[MBEngineering]

HI Martin
try contacting neil from the site below, he may know or have some split rim 11 x 15" Fuchs from some track cars he has, with the correct offset.

http://www.bsmotorsport.co.uk/

regards mike

[911teo]

Martin

Jeff Alton is finishing up his forged Fuchs replica wheel. He will do a 15 AND a 17 in model. You'll be able to specify sizes and offset.

As per the timing.... I have no idea.

[martin_gibson]

Originally Posted by 911teo

As per the timing.... I have no idea.

Hi Matteo,

As we both know that has been and invariably will continue to be a 'very very' long wait?

Rgds

Martin

[boba]

Originally Posted by martin_gibson

Hi Matteo,

As we both know that has been and invariably will continue to be a 'very very' long wait?

Rgds

Martin

I do believe it will be sooner than later. This photo is from another thread, and is the prototype.

[martin_gibson]

Originally Posted by boba

I do believe it will be sooner than later.