|
|
|
|
| Author |
|
|
Registered
Join Date: Jan 2004
Location: Milwaukee, WI
Posts: 3,360
|
CIS elec. connections 2 left over?
I seem to have two/one electrical connection left over.
One has a grey end and the other a black end. I know one should go to the WUR, and the other? Now that I think about it, I ll bet I missed the one for the AAR. So, Unfortunately neither one of these are labeled. Does the grey or black go to the WUR or AAR, thanks!
__________________
Jeremy C. Why's he calling me meat? I'm the one driving a Porsche. (Bull Durham) ----Nothing is far away in this car!--- -2001 996 Turbo Last edited by jcc911; 06-28-2008 at 02:33 PM.. |
||
06-28-2008, 12:37 PM
|
|
|
Registered
Join Date: Dec 1999
Location: Richmond, VA USA
Posts: 1,058
|
On my '80 SC, the grey one is on the WUR and black one on the AAR.
But it really does not matter! They are wired in PARALLEL from a common source -- the fuel pump relay. The wiring diagram shows that a red/white wire runs from the fuel pump relay to the WUR and then to the AAR. Last edited by Brian K. Haggard; 06-28-2008 at 05:24 PM.. Reason: Original said they were wired in SERIES, which was wrong. |
||
|
06-28-2008, 12:53 PM
|
|
|
Registered
Join Date: Jan 2004
Location: Milwaukee, WI
Posts: 3,360
|
Well it appears that I did not connec the AAR and the connection on that was black, so I guess that answers that.
Thanks Brian.
__________________
Jeremy C. Why's he calling me meat? I'm the one driving a Porsche. (Bull Durham) ----Nothing is far away in this car!--- -2001 996 Turbo |
||
|
06-28-2008, 02:34 PM
|
|
