Quote:
Originally Posted by boostfix
The bigest challenge of the whole process was getting the old scraper rings out without scraping the cylinder bore. The manual talks about collapsing the steel retaining ring of the scraper ring with a punch to remove. Getting the new scraper rings properly seated was next challenge! Good luck.
|
How right you are!!! After doing mine I see that Pelican sells a dust seal removal tool for abt $12 plus shipping. Abt a month ago I saw the same tool at Harbor Freight Tools for $4.49 
__________________
If it flows, it goes. If its smooth, it moves. Any questions?
96 993 C2 (Current)
87 911 Factory Turbo-Look Cab (Sold)
85 911 Factory Turbo-Look Targa (Gone)
|
08-22-2008, 02:26 PM
1987 Porsche 911 3.2
