 
					|   | 
 | 
 | 
| 
 | 
| Registered Join Date: Nov 2004 Location: Reno, NV 
					Posts: 764
				 | 
				
				What is this thing under my dash?
			 
			It is on the passenger side.  It is a cylinder about 4" long and 3/4" in diameter.  It looks like it might be ceramic.   It has 3 wires coming into it (on near each end and one in the middle).  What is it. Given that I am gutting my car of all non-essential racecar parts, do I need it?    
				__________________ 1964 356 C 1970 911T 1974 914 2.0 1986 Carrera Spec911 race car #76 1990 Carrera 2 | ||
|  01-22-2009, 05:07 PM | 
 | 
| Registered | 
			Ceramic heat sink?? Cut the blue wire!!! No. wait, the red wire!!! Er, flip a coin. 
				__________________ Make sure to check out my balls in the Pelican Parts Catalog! 917 inspired shift knobs. '84 Targa - Arena Red - AX #104 '07 Toyota Camry Hybrid - Yes, I'm that guy... '01 Toyota Corolla - Urban Camouflage - SOLD | ||
|  01-22-2009, 05:17 PM | 
 | 
| Registered | 
			Resistor Controller for you fan motor.
		 | ||
|  01-22-2009, 05:20 PM | 
 | 
| Recreational User Join Date: Mar 2004 Location: A Mile High 
					Posts: 4,159
				 | 
			Series resistor for the footwell blowers.
		 | ||
|  01-22-2009, 05:23 PM | 
 | 
| Registered Join Date: Nov 2004 Location: Reno, NV 
					Posts: 764
				 | 
			Thanks.  Since the blowers are out, it is coming out as well!
		 
				__________________ 1964 356 C 1970 911T 1974 914 2.0 1986 Carrera Spec911 race car #76 1990 Carrera 2 | ||
|  01-22-2009, 05:30 PM | 
 | 
| Registered Join Date: Jan 2006 Location: Santa Barbara, CA 
					Posts: 2,307
				 | 
			Ballast resistor for Crane ignition?
		 
				__________________ jhtaylor santa barbara 74 911 coupe. 2.7 motor by Schneider Auto Santa Barbara. Case blueprinted, shuffle-pinned, boat-tailed by Competition Engineering. Elgin mod-S cams. J&E 9.5's. PMO's. 73 Targa (gone but not forgotten) | ||
|  01-22-2009, 06:49 PM | 
 | 
|   | 
| Registered Join Date: Oct 2004 Location: Dayton, Ohio 
					Posts: 765
				 | 
			
beer thru the nose!
		 
				__________________ Bill 87 911 Targa 06 Toyota Sequoia | ||
|  01-22-2009, 06:59 PM | 
 | 
| Registered | 
			hey, pgeorgeson, do you still happen to have the resistor with you? I'll buy it if you still have.
		 
				__________________ 1984 911 Carrera Coupe - 32C #73 - M64/05 1998 E36 M3 4dr 2006 Sienna 5dr - the hauler 2004 Lexus GX470 2010 Cannondale Caffeine II - Lefty | ||
|  12-19-2014, 12:07 PM | 
 | 
| Registered Join Date: Jun 2000 Location: bottom left corner of the world 
					Posts: 22,808
				 | 
			Maybe call your wife/police/FBI and ask them if they would like their tracking device back    | ||
|  12-19-2014, 12:33 PM | 
 | 
| Registered Join Date: Dec 2002 Location: So Cal and So Oregon 
					Posts: 2,195
				 | 
			I have one midnight911 - just removed from my 1985 Targa.  Would you need the bracket too?
		 | ||
|  12-19-2014, 12:39 PM | 
 | 
| Registered Join Date: Feb 2006 Location: Ontario Canada 
					Posts: 2,948
				 | 
			Thats a ballast power resistor used with any type of multi step blower. Since you are providing a constant 12v to the blower you tap off different legs of the resistor to provide different levels of current to the motor. The highest speed for example would not use the resistor and bypass, the next lowest speed would come off the first tap as some of the current is burned off as heat in the resisitor and so on .  These things sit in an air stream as they become unbelievably hot. 
				__________________ 1976 Yamaha XS360 ( Beats Walkin') 1978 911 SC Targa ( Yamaha Support Vehicle ) 2006 Audi A4 2.0T (Porsche Support Vehicle ) 2014 Audi A4 2.0T Technik (Audi Support Vehicle) | ||
|  12-19-2014, 12:46 PM | 
 | 
| Registered Join Date: Dec 2002 Location: So Cal and So Oregon 
					Posts: 2,195
				 | 
			for future reference:   | ||
|  12-20-2014, 01:32 PM | 
 |