|
|
|
|
|
|
Grade A 100% Pure
Join Date: May 2008
Location: Canyon Lake TX
Posts: 112
|
Spiderlite LED's
__________________
‘88 911 Carrera Cabriolet ‘87 924S Cabriolet Racing And Performance C.R.A.P. Gruppe #20 |
||
|
|
|
|
1966 - 912 - SOLD
Join Date: May 2008
Location: oak grove, OREGON
Posts: 3,193
|
you will find better prices at superbrightleds.com
|
||
|
|
|
|
Member 911 Anonymous
|
Take Care,
Our babies bleed voltage which causes the LED to glow during the day when light are not used. The bleeding will also burn out the LEDs much sooner. Placing a equalizer will cure this issue but will defeat the low consumption of the LED's Just my experience.
__________________
'85 Carrera Targa Factory Marble Grey/Black * Turbo Tail * 930 Steering Wheel* Sport Seats * 17" Fuchs (r) * 3.4 * 964 Cams * 915 * LSD * Factory SS * Turbo Tie Rods * Bilsteins * Euro Pre-Muff * SW Chip on 4K DME * NGK * Sienes GSK * Targa Body Brace PCA/POC |
||
|
|
|
|
Registered
|
I ordered mine from [U]www.mouser.com, Prior to finding out about Superbrightleds.com. Just using mine for the heater control which seems to need some cooler running lights!
Bill 1979 911 SC Targa |
||
|
|
|
|
Registered
Join Date: Oct 2006
Posts: 452
|
Draco - please explain what an equalizer is with regard to LED's.
Thank you.
__________________
pozee |
||
|
|
|
|
Member 911 Anonymous
|
Quote:
It gets extremely hot to the touch.
__________________
'85 Carrera Targa Factory Marble Grey/Black * Turbo Tail * 930 Steering Wheel* Sport Seats * 17" Fuchs (r) * 3.4 * 964 Cams * 915 * LSD * Factory SS * Turbo Tie Rods * Bilsteins * Euro Pre-Muff * SW Chip on 4K DME * NGK * Sienes GSK * Targa Body Brace PCA/POC |
||
|
|
|
|
|
1966 - 912 - SOLD
Join Date: May 2008
Location: oak grove, OREGON
Posts: 3,193
|
he is refering to a load resistor this is a device placed in line with the lamp usualy to get the turn signal relay to "see the led lamp as the generaly dont offer enugh resistance for the relay to operate properly.
|
||
|
|
|