![]() |
|
|
|
Je Ne Sais Quoi = Targa
|
Which Weber Manual?
Our host carries 2, the Haynes and the Weber Manual by a Bob Tomlinson, anyone have opinions whether either, or both, are good, bad, or ugly?
Pelican Parts.com - Haynes Carburetor Manual Pelican Parts.com - Original Weber Tech Manual TIA ![]()
__________________
'74 Targa lightweight widebody, 3.6 motor, big bars, Speedlines, Sold 2018, '81 SC Targa with 3.2 spoilers, Webers, SSIs, 7&8X16 Fuchs, 911R style exhaust, Had a '71 911S Targa in the 80's, miss it, Had a '61 Roadster in the 70's, miss it also, |
||
![]() |
|
Registered
Join Date: Dec 2002
Location: So Cal and So Oregon
Posts: 2,193
|
I found the Tomlinson book dated - good for broadstroke info and history. I found better info for free on the web. What Weber info are you looking for?
Mike |
||
![]() |
|
Je Ne Sais Quoi = Targa
|
I have the 40 IDA 3C,
__________________
'74 Targa lightweight widebody, 3.6 motor, big bars, Speedlines, Sold 2018, '81 SC Targa with 3.2 spoilers, Webers, SSIs, 7&8X16 Fuchs, 911R style exhaust, Had a '71 911S Targa in the 80's, miss it, Had a '61 Roadster in the 70's, miss it also, |
||
![]() |
|
Registered
Join Date: Dec 2002
Location: So Cal and So Oregon
Posts: 2,193
|
yes, and what are you looking to do - rebuild and tune?
here is a parts list: parts breakdown here is a procedure for rebuilding IDA48s (should be similar - but includes some mod work): Rebuilding WEBER 48 IDA Carburetors - Aircooled.Net Tech Article here is a process for tuning dual carb setup...the process work for any multiple carb setup: Carburetors 102: Synchronize Dual Carburetors - Aircooled.Net Tech Article A nice discussion on jetting basics (shoudl apply in theory): http://www.aircooled.net/gnrlsite/resource/articles/jetting.htm I am sure there are more sources, but this is a nice start and has helped me with muy multi weber setups in the past. Mike Last edited by SpyderMike; 11-19-2009 at 09:48 AM.. |
||
![]() |
|
Registered
Join Date: Dec 2002
Location: So Cal and So Oregon
Posts: 2,193
|
oops - forgot this one - basic theory:
Weber carburetor theory Notice there are jetting and tuning sections on this particular web page. I would start here on this site first. Last edited by SpyderMike; 11-19-2009 at 09:47 AM.. |
||
![]() |
|
Registered
Join Date: Jun 2007
Location: Lander, WY
Posts: 303
|
I have a brand new Haynes manual I purchased hoping it would have some good info for my Zeniths. It's worthless for Zeniths. If you're interested I'll sell it for $18 shipped.
__________________
Doug 71 911T |
||
![]() |
|
![]() |
Registered
Join Date: Nov 2004
Location: Southampton NY
Posts: 466
|
PM me if you want the original manual
![]()
__________________
'66 3.2 "Blue Car" '73 3.0 "Orange Car" '78 3.2 "Brown Car" |
||
![]() |
|
Registered
Join Date: May 2004
Location: Boulder, Colorado
Posts: 7,275
|
Unlike the Haynes 911 repair manual, I have found the Haynes Weber manual to be quite useful and a good value. I've purchased several others, but can't say I have learned anything much more from any of them. Maybe a little more tuning/theory, but that's about it.
Walt |
||
![]() |
|
Je Ne Sais Quoi = Targa
|
I want to rebuild, one at least is dirty, and tune as well,
ddubois - thanks for the offer, give me a few days to look over the links SpyderMike was good enough to provide and if I need more info I will likely take your Haynes book, Thanks again all ![]()
__________________
'74 Targa lightweight widebody, 3.6 motor, big bars, Speedlines, Sold 2018, '81 SC Targa with 3.2 spoilers, Webers, SSIs, 7&8X16 Fuchs, 911R style exhaust, Had a '71 911S Targa in the 80's, miss it, Had a '61 Roadster in the 70's, miss it also, Last edited by Mikey83835; 11-19-2009 at 05:56 PM.. Reason: grammer |
||
![]() |
|