|
|
|
|
| Author |
|
|
Registered
Join Date: Jan 2009
Location: San Diego
Posts: 725
|
Problem installing Tarett Sway bar
I am in the process of installing a rear Tarett sway bar in my 1986 Turbo. I fit one side, no problems, but when I try to mount the passenger side, it stops about 1/4 to 1/2 in shy of the stock mount. I realize that the bar is hitting the tranny mount. Has anyone had this issue? Am I doing something wrong?
Thanks Steve
__________________
1998 993 C2S Guards Red/Black 1990 964 C2 RWB project car 2016 GT3RS White Daily driver 2018 Lamborghini Performante Gegio Telesto |
||
11-04-2009, 04:10 PM
|
|
|
Registered
Join Date: Apr 2002
Location: Santa Clara, CA
Posts: 5,668
|
On the turbo you typically have to space down the bearing blocks for clearance. Use some flat washers, both sides.
__________________
Chuck Moreland - elephantracing.com - vonnen.com |
||
|
11-04-2009, 04:14 PM
|
|
|
Registered
Join Date: Jan 2009
Location: San Diego
Posts: 725
|
Thanks Chuck!! I will do that.
__________________
1998 993 C2S Guards Red/Black 1990 964 C2 RWB project car 2016 GT3RS White Daily driver 2018 Lamborghini Performante Gegio Telesto |
||
|
11-04-2009, 04:16 PM
|
|
