Need to know how the cables and tubes are pulled....HELP

[911flyer]

Im in the process of upgrading my car from a 2.7 to a 3.2 engine.

The engine is 1984 and as for tight now we have all the major electric components in place etc but does anyone have a picture of how to pull all the electrical cables and other tubes for the 1984? It would help a lot!

Also, need electrical wiring "schedule" for both the 3.2 and the 2.7 since we are swapping some cables etc... any help on that?

Looking forward to the startup! Insane to think the car now will have about 100bhp more than before.

Thanks guys!!

[86 911 Targa]

Originally Posted by 911flyer

Im in the process of upgrading my car from a 2.7 to a 3.2 engine.

The engine is 1984 and as for tight now we have all the major electric components in place etc but does anyone have a picture of how to pull all the electrical cables and other tubes for the 1984? It would help a lot!

Also, need electrical wiring "schedule" for both the 3.2 and the 2.7 since we are swapping some cables etc... any help on that?

Looking forward to the startup! Insane to think the car now will have about 100bhp more than before.

Thanks guys!!

I don't know about the 2.7, but the Bentley bible covers the 84 3.2.

[RWebb]

pull?

you mean mechanically pull them thru the tunnel?

there are several threads on how to connect things - this is not an uncommon engine swap

no idea what the URLs are but I know some threads have connection diagrams - you may need to get busy with the search engine and cull out the many OT threads you'll find

I'd try swap + 3.2 for starters