![]() |
|
|
|
Registered
|
AC question
I know most of you will know this off the top of your head.. But how do I tell which is the Low side on my A/C compressor ?
__________________
"Todd" 98 Tahoe ,2007 Saturn Vue 86 930 black and stock, 80 930 blue tracdog 91 Spec Miata (yeah I race a chick car) "life"ll kill ya" Warren Zevon |
||
![]() |
|
Registered
|
The lline between the compressor and condensor is the high pressure side....the line between the compressor and the evap is the low pressure side.
__________________
Marc Morrison 1964 356C coupe '89 911 coupe 2008 Honda Accord 2008 Ford Ranger |
||
![]() |
|
Registered
Join Date: May 2000
Location: Los Alamos, NM, USA
Posts: 6,044
|
Other clues:
High pressure side usually has the smaller diameter hose/fittings and sometimes the high side compressor port is labeled "D" for discharge. Low pressure side usually has the larger diameter hose/fittings and the low side compressor port is sometimes labeled "S" for suction. |
||
![]() |
|
Member 911 Anonymous
|
Looking at the engine bay, the valve close to you is the High Side, the one towards the front of the car is the Low Side, sorry for the low tech advice.
![]()
__________________
'85 Carrera Targa Factory Marble Grey/Black * Turbo Tail * 930 Steering Wheel* Sport Seats * 17" Fuchs (r) * 3.4 * 964 Cams * 915 * LSD * Factory SS * Turbo Tie Rods * Bilsteins * Euro Pre-Muff * SW Chip on 4K DME * NGK * Sienes GSK * Targa Body Brace PCA/POC |
||
![]() |
|
Registered
|
Thanks guys, Draco, I think that it's compressor dependand as using the two replies above is opposite of mine.. high side is closest and on top,, Low side faces away and is on bottom..
I appreciate all the help!!
__________________
"Todd" 98 Tahoe ,2007 Saturn Vue 86 930 black and stock, 80 930 blue tracdog 91 Spec Miata (yeah I race a chick car) "life"ll kill ya" Warren Zevon |
||
![]() |
|
Registered
Join Date: Sep 2008
Location: Foothills So Cal
Posts: 121
|
The large hose is the return or suction line, the small line is the high pressure line, number 8 size hose for discharge and number 10 for suction. If it still has the factory hoses, the smaller hose is the discharge line, also check D and S and top of compressor!
|
||
![]() |
|
![]() |