![]() |
|
|
|
KEELY444
|
Whats on your project list?
I have been going strong on my Targa for the last couple of months.It looks like the economy is getting better in my region so I feel a little better spending money on my car again. Since I am married I get sh_t for spending to much on the car.So I try to spread it out.Most of my projects require $$$ so I have to decide what the priorities on the car should be.
My List: 7 and 8 are at Al Reeds for refinish $580 plus return shipping Tires 245 45 16 and 205 55 16 Toyos Have not shopped yet. Driver seat repair /recondition leather on all seats and some dye touch up. Interior is really nice and does not look to bad.$500-1500 range Trunk update/want to trim and some glue on original carpet and will cut out and trim spare tire pit so I can expose my future Fuch space saver spare set up.Have additional stock carpet for additional pieces. No $$ just waiting for my 16x6 fuch to go in to AL. Refinish 6 x16 fuch for spare (Al Reed) Around $225 with shipping both ways. Mount new OEM 16 space saver I purchased on Ebay. $30. Final buff out and wax on new paint N/C Install new stock shift knob I have N/C Detail engine compartment N/C Completed projects for this year. New complete paint job New Targa seals front and back New door seals New front and rear glass seals Installed new blaupunkt Cassette/ipod unit Installed amp under passenger seat Installed new front and rear speakers under oem grills Installed strip 3rd brake light does not show except when you use the brakes. Built and carpeted a mount for air compresser,fire extingusher,and flashlight that velcos inplace in the trunk. My car is is black/black 85 Targa with 89k on it.It is lowered and mechanically sound. I have been going for a mostly stock and original set up with the car. I would like to see what other project lists look like. |
||
![]() |
|
Registered
|
My List:
Mount a momentary Starter button in the engine compartment.
Thats it, I'm done.
__________________
78’ SC 911 Targa - 3.2SS, PMO 46, M&K 2/2 1 5/8” HEADERS, 123 DIST, PORTERFIELD R4-S PADS, KR75 CAMS, REBEL RACING BUSHINGS, KONI CLASSICS |
||
![]() |
|
KEELY444
|
Great idea
|
||
![]() |
|
Registered
|
Headlight/turn signal switch
Headlight relay kit Passenger window switch odometer gear remove tail stock decklid and grill paint wheels |
||
![]() |
|
KEELY444
|
you just reminded me passenger window switch.
Thanks |
||
![]() |
|
Registered
|
-Paint scratch on roof (buff/touch up?)
-Re-attach Headliner @ sunroof -Interior dome lights -Door buzzers -Console knobs and lights -Shifter bushings -Replace battery in key + LED -Passenger seat controls -Vaseline Fuchs -Washer fluid -Wash it
__________________
Mark 1987 Carrera Coupe http://nvrmndclothing.com/ |
||
![]() |
|
![]() |
80 911 SC, Orem, Ut
Join Date: May 2009
Location: Orem, Utah
Posts: 222
|
Find and fix oil leaks.
Detail engine bay. Dye Carpet and rear seats and trim. Replace door panels. (Already purchased) Work on Suspension. Finished. Recovered Front seats. Cut out and Replaced rusted front pan. (Battery area surprise) Need to put back together now.
__________________
Rob 1980 911 SC |
||
![]() |
|
Registered User
|
fit F & R IROC fibreglass bumpers
chop hole in front tub fit center mount oil cooler construct air box to fit modify old fibreglass hood to vent oil cooler (aka Elephant Racing project) fix various bodywork holes, dents etc new tyres (Kumho V70) change oils Hit the track! |
||
![]() |
|
KEELY444
|
RSWiser,How did you go about recovering your seats?
|
||
![]() |
|
Registered
|
Brave People listing all of the work needed!! I do not like to think about it but here goes:
#1, Inside Right Fender, Remount the Air Horns so I can install the Fan for my Oil Cooler and correct Oil cooler Lower Bracket. #2, Fix the electrical connector for the Right side Driving light #3, (This I really will have to get up for) Fix the Sun Roof. #4, Install the EZ Electric Power Steering Unit I should get sometime in May. #5, (With this one I am Done "For a While") Take the SHort tube SSI Heat Exchangers and mount them and then set up with V Band Clamps 2 secondary Pipes. One with 300 Hole Metallic Cats and two without and mount my 2 in & 2 out Muffler from Australia I had on the 1976. I even bought a Tig Welder to do this one.
__________________
Made History at Daytona and Still one Fast Old Man! 1982 Porsche 911 SC & 2017 Honda Si |
||
![]() |
|
Registered
Join Date: Jul 2010
Location: Yakima, WA
Posts: 421
|
figure out a plan for front speakers (just installed rs panels)
find a child seat do a tuneup replace some bushings edit: make some new floor boards, dead pedal, floor mats and blower motor assembly cover Last edited by Ramathorn; 04-11-2011 at 09:58 AM.. |
||
![]() |
|
1966 - 912 - SOLD
Join Date: May 2008
Location: oak grove, OREGON
Posts: 3,193
|
paint a stripped out 912, and move all the needed parts from another fairly complete running car over to it-
and i was told by my wife to have one ove everything on a shelf labeled "spare parts"
__________________
i was too tired to be pretty last night! |
||
![]() |
|
![]() |
KEELY444
|
Interesting lists.It's great to see so many people keeping these awesome cars on the road and the work put into them.
|
||
![]() |
|
Senior Advisor
|
Pull engine, sent to Supertec for many HP, send trans to John Walker for rebuild to handle HP, street/racing 2 suspension from Elephant/Rebel. That lets me work on the body for a little while! And next week...
__________________
08 Cayenne Turbo |
||
![]() |
|
KEELY444
|
Here is the tray i am velcro mounting in the upper left hand corner of the trunk.carpeted with OEM carpet.
![]() |
||
![]() |
|
Registered
Join Date: Jan 2003
Location: Dublin, CA
Posts: 6,273
|
Nothing - after eight years, the RSR Mongrel is done!
__________________
Sergio The GT Lid Whisperer PCA 42yrs - National DE Instructor / Ex-RGruppe #197 '19 718 Cayman S (9th Porsche/1st with PDK) '14 Subaru Forester XT (Porsche support vehicle) |
||
![]() |
|
KEELY444
|
Lucky man!
|
||
![]() |
|
Registered
|
figure out to get my Cars Inc redone targa top to actually fit so i can close the windows and have glass go in the rubber grove.
redo carpet-interior. redo front seats in leather. rewire stereo new stereo/speakers. my bank acct (and wife) are still recovering from an engine rebuild in just finished last month so i probably wont start until the fall...
__________________
83 SC Targa -- 3.2SS, GT2-108 Dougherty Cams, 9.5:1 JE Pistons, Supertec Studs, PMO ITB's, MS2 EFI, SSI's, Recurved Dizzy, MSD, Backdated Dansk Sport Stainless 2 in 1 out, Elephant Polybronze, Turbo Tie Rods, Bilstein HD's, Hollow 21-27 TBs, Optima Redtop 34R, Griffiths-ZIMS AC, Seine Shifter, Elephant Racing Oil Cooling. |
||
![]() |
|
Registered
|
Paint it
sell it
__________________
SWB 911S 1967 307653S in my fathers garage now LWB 911T 1971 9111120264 Back in my garage after a lenghty stay in Oregon |
||
![]() |
|
Registered
|
Damn James. Sounds ambitious. exciting. why dont you do the engine yourself?
__________________
83 SC Targa -- 3.2SS, GT2-108 Dougherty Cams, 9.5:1 JE Pistons, Supertec Studs, PMO ITB's, MS2 EFI, SSI's, Recurved Dizzy, MSD, Backdated Dansk Sport Stainless 2 in 1 out, Elephant Polybronze, Turbo Tie Rods, Bilstein HD's, Hollow 21-27 TBs, Optima Redtop 34R, Griffiths-ZIMS AC, Seine Shifter, Elephant Racing Oil Cooling. |
||
![]() |
|