|
|
|
|
| Author |
|
|
Wer bremst verliert
Join Date: Jan 2005
Location: Toronto, Ontario
Posts: 4,767
|
Where to get linkages
I am looking for a replacement female-threaded 1/4"socket ball diameter quick disconnect for a throttle linkage. Similar to the ball-and-sockets used in the throttle linkages in our 911's but this one is for a BBK 80mm throttle body (for the supercharged car.) Same female threading (0.8mm or 28-) but with a slightly smaller socket to fit a slightly smaller ball. No luck at Grainger, Mcmaster carr, etc
Ford dealers only carry the whole cable and they say in any case the socket is swaged to the cable. I lost the original and I dont know who made the cable/linkage in the first place...that guy was in Australia and it was done at the shop while I was away. Mcmaster carr doesnt have the right size...wurth doesnt have any...any suggestions for mail-order linkages? Thanks
__________________
2007 911 Turbo - Not a toy 1985 911 Cab - Wife's toy 1982 911 3.2 Indiash Rot Track Supercharged track toy 1978 911 3.0 Lichtbau toy "Gretchen" 1971 911 Targa S backroad toy Last edited by JohnJL; 08-15-2011 at 07:16 PM.. |
||
08-15-2011, 06:41 PM
|
|
