![]() |
|
|
|
|
![]() |
|
LinkBack | Thread Tools | Rate Thread |
Registered
Join Date: Oct 2005
Posts: 28
|
Help! 1978 911sc Door lock driver side would NOT open from inside round knob
I need advice how to fix driver door lock for my 1978 911sc...
The door lock would not open from inside round rotation door knob but would open with inside pull-up lever handle... The key would not work either from outside... Any advice highly appreciated... |
||
![]() |
|
Registered
|
I would recommend pulling door card to inspect linkages.
when I bought my car the little pull up knob was missing, When I removed the card I found it down inside disconnected, put everything back together and all is well I assume that your linkage from the round knob has come apart...this job is very easy to do only about 6 or so screws to remove door card and all the linkages are pretty straight forward p.s. there is a plastic membrane that should be fixed to the door behind card I you remove it it should be put back, this is a vapor barrier
__________________
Justin 84 Carrera Targa 98 F-150 4x4 |
||
![]() |
|
Registered
Join Date: Oct 2005
Posts: 28
|
My round door knob linkage - just fine...
I may suspect the malfunction of the locker itself...!? as if I turn/swing the side door assembly latch - round knob would function but as soon as I release outside lock lever handle - inside round knob would not work... The key would not work either...!? |
||
![]() |
|