Here's my B&B system 930 / 964 system. They have a jig for making a 930 system work with 964 bumper cutouts..


http://forums.pelicanparts.com/uploa...1332010830.jpg

ye nice stuff but thats for a turbo :p could you do me a favor what is the distence between the centers of the 2 exit pieces? thx

Point is, B&B / Fabspeed etc. can make u what u need, else.. a good muffler shop to weld up the perfect fit.

ye gues so probley gona buy the dansk then cause its the cheapest to make it fit.. otherwise id have to pay alot..

The threads above are advising you that if you're looking to keep costs down, you might be best off having a muffler shop weld a second outlet onto your existing muffler (making it work with the second hole) rather than buying/modifying a new 2 outlet muffler.

That said, you'll find that a lot of folks abandon their two outlet mufflers (or cap the second outlet) after they discover that the second outlet causes the muffler to drone/resonate at the 2-3k rpm range we generally drive our cars at.

what do you mean with resonate? anyway ima buy a danks dual outlet exhaust and make that fit my bumper.greetz