![]() |
|
|
|
RETIRED
|
Adding a diagnostic port.....
Has anyone added a diagnostic port (OBD) to a conversion?
I have a 91 3.6 in my SC and I have nothing else to do but waste time and source used parts. ![]()
__________________
1983/3.6, backdate to long hood 2012 ML350 3.0 Turbo Diesel |
||
![]() |
|
RETIRED
|
So no one has done this?
__________________
1983/3.6, backdate to long hood 2012 ML350 3.0 Turbo Diesel |
||
![]() |
|
Registered
Join Date: May 2003
Location: Manhattan Beach, CA
Posts: 2,350
|
It will not require much effort other than getting the 964 round connector
and connecting it to the DME ECM. All that's needed is to connector four wires, i.e. ground, +12, and K & L lines, since communication with just the ECM is needed. Most of the Porsche junk yards should have the connector for a low price as there isn't much of a demand. One could also hookup the CEL too which would be nice to have.
__________________
Have Fun Loren Systems Consulting Automotive Electronics '88 911 3.2 '04 GSXR1000 '01 Ducati 996 '03 BMW BCR - Gone |
||
![]() |
|
RETIRED
|
OK, what would involve adding a check engine light besides having an extra idiot light in the dash?
![]()
__________________
1983/3.6, backdate to long hood 2012 ML350 3.0 Turbo Diesel |
||
![]() |
|