Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Keith
 
Join Date: Aug 2012
Location: Northern California
Posts: 45
Garage
Send a message via Yahoo to keithbkeller
Has anyone got a good rebuilt WUR??

Here are my pressure test readings done today with modertly warm weather
Hi Guys, Here are the readings I needed to provide; (1981 911 SC)
Outside temperature is 75 F
Valve closed pump running pressure is; 3-BAR
Valvue open pump pressure 2.1- BAR
Valve open pump running WUR plugged in pressure (warm) control pressure 2.9-BAR
Valve open after warm pressure; Residual pressure Immeadiately after turning car off; 2.9, after 30 seconds 2.7, after 60 seconds 2.6, after 120 seconds 2.3
after 15 minutes 1.7, after 30 minutes 1.7
Note; I inadvertently drove this car around yesterday with the WUR electrical connection unplugged with no adverse effects. Its like the fuel is just pumping through the WUR with it having no effect on anything cold or hot.
However it was around 75 degrees yesterday during my drive.
I think I need a rebuilt WUR what do think??
Please give me your input. Thanks! Keith

Old 09-07-2012, 04:33 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Reply


 


All times are GMT -8. The time now is 06:43 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.