|
|
|
|
| Author |
|
|
Guest
Posts: n/a
|
door stay that i replaced works in 2 positions,but it clicks when i move door to open?
__________________ This post was auto-generated based upon a question asked on our tech article page here: Pelican Technical Article: Door Stay Replacement and Reinforcement - 911 (1965-89) - 930 Turbo (1975-89) |
||
05-28-2013, 02:54 PM
|
|
|
Moderator
Join Date: Jul 2012
Location: New England
Posts: 3,189
|
Check to see if the door metal that supports the stay is not bent. It may be hitting because the whole panel is bent
- Nick |
||
|
05-28-2013, 02:54 PM
|
|
|
76 911S Targa
Join Date: Oct 2010
Location: Idaho
Posts: 1,150
|
"There are multiple threads on this. The John Walker fix is to use a 6mm bolt and nyloc nut in place of the press fit pin. Tighten just enough to prevent unwanted movement. No more pop. "
Question on "snapping" sound in driver's door
__________________
76 911S, 2.7, Bursch Thermal Reactor Replacements, Smog Pump Removed, Magnecors, Silicone Valve Cover Gaskets, 11 Blade Fan, Carrera Oil Cooler, Turbo Tie Rods. |
||
|
05-28-2013, 03:21 PM
|
|
