reference sensor connector

[jeffs targa]

Help, The connector to my reference sensor is missing the female end plug all the is now is small staycon type which one is broken any ides to replace /repair it?
I am trying to upload photo if can help .
Good news i found to no start problem

[jeffs targa]

Here is photo hope this is ok

[steely]

Confirm this first.

Junior timer connector from Eagleday.
AMP Connectors/Terminals

[cabmandone]

Maybe try the used parts forum to see if someone will part with one from an old harness??

[jeffs targa]

Thanks, steely looks like they just fit the bill there is a electronic supply house here in Albany that also may have something that will fit guess its worth to give them a shot.
As you can see the female side is gone.I have had the car for a year now still much to learn.

[Flat6pac]

I have one and notes because I had a problem with the female side collapsing inside the connector. My notes are only from the day I did the job and the replacement piece is not proper color code but notes have the correct color code for the particular part I was replacing.
There is a 50/50 chance its what you need.
I PM ed my phone number to you
Bruce