|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2002
Posts: 6
|
proper fix for control arm mounts?
Greetings,
the holes in the control arm mounts (where the arm mounts to the body) in my 82 911 are egged out. that is, they have become bigger than they are supposed to be. that allows the control arm to move slightly in the mount which dynamically changes the allignment on the rear wheel when cornering. Can anyone tell me the proper fix for this? thanks -Bryan |
||
10-22-2002, 05:40 AM
|
|
|
Registered
Join Date: Oct 2002
Posts: 6
|
i've heard that you can assemble it with properly sized heavy washers on the outsides of the mount and tack them then disasemble and weld them in place. has anyne done this or have any other reccomendations?
|
||
|
10-22-2002, 01:45 PM
|
|
|
Registered
Join Date: May 2000
Location: Los Alamos, NM, USA
Posts: 6,044
|
Do you mean the rubber bushings or the bores the rubber bushings go into? Jim
|
||
|
10-22-2002, 05:28 PM
|
|
