![]() |
|
|
|
Registered User
|
Disconnected wire
By replacing my fuel injectors en injector sleaves today I noticed a disconnected wire on the passenger side of the car below the air box. Does anyone have an idea what it's for and where it should be connected to?
![]() |
||
![]() |
|
Member 911 Anonymous
|
A picture would really help. Please post it and we will give it a shot.
__________________
'85 Carrera Targa Factory Marble Grey/Black * Turbo Tail * 930 Steering Wheel* Sport Seats * 17" Fuchs (r) * 3.4 * 964 Cams * 915 * LSD * Factory SS * Turbo Tie Rods * Bilsteins * Euro Pre-Muff * SW Chip on 4K DME * NGK * Sienes GSK * Targa Body Brace PCA/POC |
||
![]() |
|
Brew Master
|
Do you have backdated heat on your ride? That looks kinda like the connector that would go to the heater blower fan to me but I don't know why it would be on the right side of the car.
|
||
![]() |
|
Registered
Join Date: Dec 1999
Location: Richmond, VA USA
Posts: 1,058
|
Also, depending on the year and specific model of 911, on the LEFT side is the thermotime switch (above the #2 and #3 runners) that may use that type of connector. Again, why it is on the RIGHT side ... ?
|
||
![]() |
|
Member 911 Anonymous
|
Thanks, can you zoom out so we can see it in reference to the rest of the engine?
+1 so far it looks like a heater blower motor wire connector 12V/ground. Does your blower motor work?
__________________
'85 Carrera Targa Factory Marble Grey/Black * Turbo Tail * 930 Steering Wheel* Sport Seats * 17" Fuchs (r) * 3.4 * 964 Cams * 915 * LSD * Factory SS * Turbo Tie Rods * Bilsteins * Euro Pre-Muff * SW Chip on 4K DME * NGK * Sienes GSK * Targa Body Brace PCA/POC |
||
![]() |
|
ROW '78 911 Targa
|
Only used on '78/'79 CIS for the thermal vacuum switch.
Still built into the harnesses from '80-'83 but not used. Tape it up as there is a constant 12 VDC to it while the ignition is on.
__________________
Dennis Euro 1978 SC Targa, SSI's, Dansk 2/1, PMO ITBs, Electric A/C Need a New Wiring Harness? PM or e-mail me. Search for "harnesses" in the classifieds. |
||
![]() |
|
![]() |
Member 911 Anonymous
|
^^^^ There you have it :-)
__________________
'85 Carrera Targa Factory Marble Grey/Black * Turbo Tail * 930 Steering Wheel* Sport Seats * 17" Fuchs (r) * 3.4 * 964 Cams * 915 * LSD * Factory SS * Turbo Tie Rods * Bilsteins * Euro Pre-Muff * SW Chip on 4K DME * NGK * Sienes GSK * Targa Body Brace PCA/POC |
||
![]() |
|
Registered User
|
The heat blower is working and uses a similar connector. Seems like it has indeed no function to my '83 SC. I'll tape it up so it can't harm.
Thanks for your help! |
||
![]() |
|