![]() |
|
|
|
Registered
Join Date: Oct 2001
Location: Kennesaw, GA USA
Posts: 95
|
![]()
Does anyone have the tranny codes (part stamped on housing) for the 915 & G50? Looking at an 85 vs 88 in a non turbo.
Thanks |
||
![]() |
|
Registered
Join Date: Feb 2000
Location: London, UK
Posts: 2,349
|
![]()
I don't know if these are the numbers that you're referring to but:
1) 1985 ROW Carrera models 915/69 2) 1985 USA Carrera models 915/70 3) 1988 ROW Carrera models G50/00 4) 1988 USA Carrera models G50/01 Gear ratios were as follows: 1) 3.181/1.833/1.261/1.000/0.763 Reverse=3.325 Final drive=3.875 2) 3.181/1.778/1.261/1.000/0.790 Reverse=3.325 Final drive=3.875 3) 3.500/2.059/1.409/1.074/0.861 Reverse=2.857 Final drive=3.444 4) as above Andy Boyle(UK) '69 911E [This message has been edited by andyjboy (edited 10-21-2001).] |
||
![]() |
|